v14.1.0 Nautilus (release candidate 1)

Major Changes from Mimic

  • Dashboard:

    The Ceph Dashboard has gained a lot of new functionality:

    • Support for multiple users / roles
    • SSO (SAMLv2) for user authentication
    • Auditing support
    • New landing page, showing more metrics and health info
    • I18N support
    • REST API documentation with Swagger API

    New Ceph management features include:

    • OSD management (mark as down/out, change OSD settings, recovery profiles)
    • Cluster config settings editor
    • Ceph Pool management (create/modify/delete)
    • ECP management
    • RBD mirroring configuration
    • Embedded Grafana Dashboards (derived from Ceph Metrics)
    • CRUSH map viewer
    • NFS Ganesha management
    • iSCSI target management (via Ceph iSCSI Gateway)
    • RBD QoS configuration
    • Ceph Manager (ceph-mgr) module management
    • Prometheus alert Management

    Also, the Ceph Dashboard is now split into its own package named ceph-mgr-dashboard. So, you might want to install it separately, if your package management software fails to do so when it installs ceph-mgr.

  • RADOS:

    • The number of placement groups (PGs) per pool can now be decreased at any time, and the cluster can automatically tune the PG count based on cluster utilization or administrator hints.
    • The new v2 wire protocol brings support for encryption on the wire.
    • Physical storage devices consumed by OSD and Monitor daemons are now tracked by the cluster along with health metrics (i.e., SMART), and the cluster can apply a pre-trained prediction model or a cloud-based prediction service to warn about expected HDD or SSD failures.
    • The NUMA node for OSD daemons can easily be monitored via the ceph osd numa-status command, and configured via the osd_numa_node config option.
    • When BlueStore OSDs are used, space utilization is now broken down by object data, omap data, and internal metadata, by pool, and by pre- and post- compression sizes.
    • OSDs more effectively prioritize the most important PGs and objects when performing recovery and backfill.
    • Progress for long-running background processes–like recovery after a device failure–is now reported as part of ceph status.
    • An experimental Coupled-Layer “Clay” erasure code plugin has been added that reduces network bandwidth and IO needed for most recovery operations.
  • RGW:

    • S3 lifecycle transition for tiering between storage classes.
    • A new web frontend (Beast) has replaced civetweb as the default, improving overall performance.
    • A new publish/subscribe infrastructure allows RGW to feed events to serverless frameworks like knative or data pipelies like Kafka.
    • A range of authentication features, including STS federation using OAuth2 and OpenID::connect and an OPA (Open Policy Agent) authentication delegation prototype.
    • The new archive zone federation feature enables full preservation of all objects (including history) in a separate zone.
  • CephFS:

    • MDS stability has been greatly improved for large caches and long-running clients with a lot of RAM. Cache trimming and client capability recall is now throttled to prevent overloading the MDS.
    • CephFS may now be exported via NFS-Ganesha clusters in environments managed by Rook. Ceph manages the clusters and ensures high-availability and scalability. An introductory demo is available. More automation of this feature is expected to be forthcoming in future minor releases of Nautilus.
    • The MDS mds_standby_for_*, mon_force_standby_active, and mds_standby_replay configuration options have been obsoleted. Instead, the operator may now set the new allow_standby_replay flag on the CephFS file system. This setting causes standbys to become standby-replay for any available rank in the file system.
    • MDS now supports dropping its cache which concurrently asks clients to trim their caches. This is done using MDS admin socket cache drop command.
    • It is now possible to check the progress of an on-going scrub in the MDS. Additionally, a scrub may be paused or aborted. See the scrub documentation for more information.
    • A new interface for creating volumes is provided via the ceph volume command-line-interface.
    • A new cephfs-shell tool is available for manipulating a CephFS file system without mounting.
    • CephFS-related output from ceph status has been reformatted for brevity, clarity, and usefulness.
    • Lazy IO has been revamped. It can be turned on by the client using the new CEPH_O_LAZY flag to the ceph_open C/C++ API or via the config option client_force_lazyio.
    • CephFS file system can now be brought down rapidly via the ceph fs fail command. See the administration page for more information.
  • RBD:

    • Images can be live-migrated with minimal downtime to assist with moving images between pools or to new layouts.
    • New rbd perf image iotop and rbd perf image iostat commands provide an iotop- and iostat-like IO monitor for all RBD images.
    • The ceph-mgr Prometheus exporter now optionally includes an IO monitor for all RBD images.
    • Support for separate image namespaces within a pool for tenant isolation.
  • Misc:

    • Ceph has a new set of orchestrator modules to directly interact with external orchestrators like ceph-ansible, DeepSea, Rook, or simply ssh via a consistent CLI (and, eventually, Dashboard) interface.

Upgrading from Mimic or Luminous

Notes

  • During the upgrade from Luminous to nautilus, it will not be possible to create a new OSD using a Luminous ceph-osd daemon after the monitors have been upgraded to Nautilus. We recommend you avoid adding or replacing any OSDs while the upgrade is in process.
  • We recommend you avoid creating any RADOS pools while the upgrade is in process.
  • You can monitor the progress of your upgrade at each stage with the ceph versions command, which will tell you what ceph version(s) are running for each type of daemon.

Instructions

  1. If your cluster was originally installed with a version prior to Luminous, ensure that it has completed at least one full scrub of all PGs while running Luminous. Failure to do so will cause your monitor daemons to refuse to join the quorum on start, leaving them non-functional.

    If you are unsure whether or not your Luminous cluster has completed a full scrub of all PGs, you can check your cluster’s state by running:

    # ceph osd dump | grep ^flags
    

    In order to be able to proceed to Nautilus, your OSD map must include the recovery_deletes and purged_snapdirs flags.

    If your OSD map does not contain both these flags, you can simply wait for approximately 24-48 hours, which in a standard cluster configuration should be ample time for all your placement groups to be scrubbed at least once, and then repeat the above process to recheck.

    However, if you have just completed an upgrade to Luminous and want to proceed to Mimic in short order, you can force a scrub on all placement groups with a one-line shell command, like:

    # ceph pg dump pgs_brief | cut -d " " -f 1 | xargs -n1 ceph pg scrub
    

    You should take into consideration that this forced scrub may possibly have a negative impact on your Ceph clients’ performance.

  2. Make sure your cluster is stable and healthy (no down or recovering OSDs). (Optional, but recommended.)

  3. Set the noout flag for the duration of the upgrade. (Optional, but recommended.):

    # ceph osd set noout
    
  4. Upgrade monitors by installing the new packages and restarting the monitor daemons. For example,:

    # systemctl restart ceph-mon.target
    

    Once all monitors are up, verify that the monitor upgrade is complete by looking for the nautilus string in the mon map. For example:

    # ceph mon dump | grep min_mon_release
    

    should report:

    min_mon_release 14 (nautilus)
    

    If it doesn’t, that implies that one or more monitors hasn’t been upgraded and restarted and the quorum is not complete.

  5. Upgrade ceph-mgr daemons by installing the new packages and restarting all manager daemons. For example,:

    # systemctl restart ceph-mgr.target
    

    Please note, if you are using Ceph Dashboard, you will probably need to install ceph-mgr-dashboard separately after upgrading ceph-mgr package. The install script of ceph-mgr-dashboard will restart the manager daemons automatically for you. So in this case, you can just skip the step to restart the daemons.

    Verify the ceph-mgr daemons are running by checking ceph -s:

    # ceph -s
    
    ...
      services:
       mon: 3 daemons, quorum foo,bar,baz
       mgr: foo(active), standbys: bar, baz
    ...
    
  6. Upgrade all OSDs by installing the new packages and restarting the ceph-osd daemons on all hosts:

    # systemctl restart ceph-osd.target
    

    You can monitor the progress of the OSD upgrades with the ceph versions or ceph osd versions command:

    # ceph osd versions
    {
       "ceph version 13.2.5 (...) mimic (stable)": 12,
       "ceph version 14.2.0 (...) nautilus (stable)": 22,
    }
    
  7. If there are any OSDs in the cluster deployed with ceph-disk (e.g., almost any OSDs that were created before the Mimic release), you need to tell ceph-volume to adopt responsibility for starting the daemons. On each host containing OSDs, ensure the OSDs are currently running, and then:

    # ceph-volume simple scan
    # ceph-volume simple activate --all
    

    We recommend that each OSD host be rebooted following this step to verify that the OSDs start up automatically.

    Note that ceph-volume doesn’t have the same hot-plug capability that ceph-disk did, where a newly attached disk is automatically detected via udev events. If the OSD isn’t currently running when the above scan command is run, or a ceph-disk-based OSD is moved to a new host, or the host OSD is reinstalled, or the /etc/ceph/osd directory is lost, you will need to scan the main data partition for each ceph-disk OSD explicitly. For example,:

    # ceph-volume simple scan /dev/sdb1
    

    The output will include the appopriate ceph-volume simple activate command to enable the OSD.

  8. Upgrade all CephFS MDS daemons. For each CephFS file system,

    1. Reduce the number of ranks to 1. (Make note of the original number of MDS daemons first if you plan to restore it later.):

      # ceph status
      # ceph fs set <fs_name> max_mds 1
      
    2. Wait for the cluster to deactivate any non-zero ranks by periodically checking the status:

      # ceph status
      
    3. Take all standby MDS daemons offline on the appropriate hosts with:

      # systemctl stop ceph-mds@<daemon_name>
      
    4. Confirm that only one MDS is online and is rank 0 for your FS:

      # ceph status
      
    5. Upgrade the last remaining MDS daemon by installing the new packages and restarting the daemon:

      # systemctl restart ceph-mds.target
      
    6. Restart all standby MDS daemons that were taken offline:

      # systemctl start ceph-mds.target
      
    7. Restore the original value of max_mds for the volume:

      # ceph fs set <fs_name> max_mds <original_max_mds>
      
  9. Upgrade all radosgw daemons by upgrading packages and restarting daemons on all hosts:

    # systemctl restart radosgw.target
    
  10. Complete the upgrade by disallowing pre-Nautilus OSDs and enabling all new Nautilus-only functionality:

    # ceph osd require-osd-release nautilus
    
  11. If you set noout at the beginning, be sure to clear it with:

    # ceph osd unset noout
    
  12. Verify the cluster is healthy with ceph health.

    If your CRUSH tunables are older than Hammer, Ceph will now issue a health warning. If you see a health alert to that effect, you can revert this change with:

    ceph config set mon mon_crush_min_required_version firefly
    

    If Ceph does not complain, however, then we recommend you also switch any existing CRUSH buckets to straw2, which was added back in the Hammer release. If you have any ‘straw’ buckets, this will result in a modest amount of data movement, but generally nothing too severe.:

    ceph osd getcrushmap -o backup-crushmap
    ceph osd crush set-all-straw-buckets-to-straw2
    

    If there are problems, you can easily revert with:

    ceph osd setcrushmap -i backup-crushmap
    

    Moving to ‘straw2’ buckets will unlock a few recent features, like the crush-compat balancer mode added back in Luminous.

  13. To enable the new v2 network protocol, issue the following command:

    ceph mon enable-msgr2
    

    This will instruct all monitors that bind to the old default port 6789 for the legacy v1 protocol to also bind to the new 3300 v2 protocol port. To see if all monitors have been updated,:

    ceph mon dump
    

    and verify that each monitor has both a v2: and v1: address listed.

  14. For each host that has been upgrade, you should update your ceph.conf file so that it references both the v2 and v1 addresses. Things will still work if only the v1 IP and port are listed, but each CLI instantiation or daemon will need to reconnect after learning the monitors real IPs, slowing things down a bit and preventing a full transition to the v2 protocol.

    This is also a good time to fully transition any config options in ceph.conf into the cluster’s configuration database. On each host, you can use the following command to import any option into the monitors with:

    ceph config assimilate-conf -i /etc/ceph/ceph.conf
    

    To create a minimal but sufficient ceph.conf for each host,:

    ceph config generate-minimal-conf > /etc/ceph/ceph.conf.new
    mv /etc/ceph/ceph.conf.new /etc/ceph/ceph.conf
    

    Be sure to use this new config–and, specifically, the new syntax for the mon_host option that lists both v2: and v1: addresses in brackets–on hosts that have been upgraded to Nautilus, since pre-nautilus versions of Ceph to not understand the syntax.

  15. Consider enabling the telemetry module to send anonymized usage statistics and crash information to the Ceph upstream developers. To see what would be reported (without actually sending any information to anyone),:

    ceph mgr module enable telemetry
    ceph telemetry show
    

    If you are comfortable with the data that is reported, you can opt-in to automatically report the high-level cluster metadata with:

    ceph telemetry on
    

Upgrading from pre-Luminous releases (like Jewel)

You must first upgrade to Luminous (12.2.z) before attempting an upgrade to Nautilus. In addition, your cluster must have completed at least one scrub of all PGs while running Luminous, setting the recovery_deletes and purged_snapdirs flags in the OSD map.

Upgrade compatibility notes

These changes occurred between the Mimic and Nautilus releases.

  • ceph pg stat output has been modified in json format to match ceph df output:

    • “raw_bytes” field renamed to “total_bytes”
    • “raw_bytes_avail” field renamed to “total_bytes_avail”
    • “raw_bytes_avail” field renamed to “total_bytes_avail”
    • “raw_bytes_used” field renamed to “total_bytes_raw_used”
    • “total_bytes_used” field added to represent the space (accumulated over
      all OSDs) allocated purely for data objects kept at block(slow) device
  • ceph df [detail] output (GLOBAL section) has been modified in plain format:

    • new ‘USED’ column shows the space (accumulated over all OSDs) allocated purely for data objects kept at block(slow) device.
    • ‘RAW USED’ is now a sum of ‘USED’ space and space allocated/reserved at
      block device for Ceph purposes, e.g. BlueFS part for BlueStore.
  • ceph df [detail] output (GLOBAL section) has been modified in json format:

    • ‘total_used_bytes’ column now shows the space (accumulated over all OSDs) allocated purely for data objects kept at block(slow) device
    • new ‘total_used_raw_bytes’ column shows a sum of ‘USED’ space and space allocated/reserved at block device for Ceph purposes, e.g. BlueFS part for BlueStore.
  • ceph df [detail] output (POOLS section) has been modified in plain format:

    • ‘BYTES USED’ column renamed to ‘STORED’. Represents amount of data stored by the user.
    • ‘USED’ column now represent amount of space allocated purely for data by all OSD nodes in KB.
    • ‘QUOTA BYTES’, ‘QUOTA OBJECTS’ aren’t showed anymore in non-detailed mode.
    • new column ‘USED COMPR’ - amount of space allocated for compressed data. i.e., compressed data plus all the allocation, replication and erasure coding overhead.
    • new column ‘UNDER COMPR’ - amount of data passed through compression (summed over all replicas) and beneficial enough to be stored in a compressed form.
    • Some columns reordering
  • ceph df [detail] output (POOLS section) has been modified in json format:

    • ‘bytes used’ column renamed to ‘stored’. Represents amount of data stored by the user.
    • ‘raw bytes used’ column renamed to “stored_raw”. Totals of user data
      over all OSD excluding degraded.
    • new ‘bytes_used’ column now represent amount of space allocated by all OSD nodes.
    • ‘kb_used’ column - the same as ‘bytes_used’ but in KB.
    • new column ‘compress_bytes_used’ - amount of space allocated for compressed data. i.e., compressed data plus all the allocation, replication and erasure coding overhead.
    • new column ‘compress_under_bytes’ amount of data passed through compression (summed over all replicas) and beneficial enough to be stored in a compressed form.
  • rados df [detail] output (POOLS section) has been modified in plain format:

    • ‘USED’ column now shows the space (accumulated over all OSDs) allocated purely for data objects kept at block(slow) device.
    • new column ‘USED COMPR’ - amount of space allocated for compressed data. i.e., compressed data plus all the allocation, replication and erasure coding overhead.
    • new column ‘UNDER COMPR’ - amount of data passed through compression (summed over all replicas) and beneficial enough to be stored in a compressed form.
  • rados df [detail] output (POOLS section) has been modified in json format:

    • ‘size_bytes’ and ‘size_kb’ columns now show the space (accumulated over all OSDs) allocated purely for data objects kept at block device.
    • new column ‘compress_bytes_used’ - amount of space allocated for compressed data. i.e., compressed data plus all the allocation, replication and erasure coding overhead.
    • new column ‘compress_under_bytes’ amount of data passed through compression (summed over all replicas) and beneficial enough to be stored in a compressed form.
  • ceph pg dump output (totals section) has been modified in json format:

    • new ‘USED’ column shows the space (accumulated over all OSDs) allocated purely for data objects kept at block(slow) device.
    • ‘USED_RAW’ is now a sum of ‘USED’ space and space allocated/reserved at block device for Ceph purposes, e.g. BlueFS part for BlueStore.
  • The ceph osd rm command has been deprecated. Users should use ceph osd destroy or ceph osd purge (but after first confirming it is safe to do so via the ceph osd safe-to-destroy command).

  • The MDS now supports dropping its cache for the purposes of benchmarking.:

    ceph tell mds.* cache drop <timeout>
    

    Note that the MDS cache is cooperatively managed by the clients. It is necessary for clients to give up capabilities in order for the MDS to fully drop its cache. This is accomplished by asking all clients to trim as many caps as possible. The timeout argument to the cache drop command controls how long the MDS waits for clients to complete trimming caps. This is optional and is 0 by default (no timeout). Keep in mind that clients may still retain caps to open files which will prevent the metadata for those files from being dropped by both the client and the MDS. (This is an equivalent scenario to dropping the Linux page/buffer/inode/dentry caches with some processes pinning some inodes/dentries/pages in cache.)

  • The mon_health_preluminous_compat and mon_health_preluminous_compat_warning config options are removed, as the related functionality is more than two versions old. Any legacy monitoring system expecting Jewel-style health output will need to be updated to work with Nautilus.

  • Nautilus is not supported on any distros still running upstart so upstart specific files and references have been removed.

  • The ceph pg <pgid> list_missing command has been renamed to ceph pg <pgid> list_unfound to better match its behaviour.

  • The rbd-mirror daemon can now retrieve remote peer cluster configuration secrets from the monitor. To use this feature, the rbd-mirror daemon CephX user for the local cluster must use the profile rbd-mirror mon cap. The secrets can be set using the rbd mirror pool peer add and rbd mirror pool peer set actions.

  • The ‘rbd-mirror’ daemon will now run in active/active mode by default, where mirrored images are evenly distributed between all active ‘rbd-mirror’ daemons. To revert to active/passive mode, override the ‘rbd_mirror_image_policy_type’ config key to ‘none’.

  • The ceph mds deactivate is fully obsolete and references to it in the docs have been removed or clarified.

  • The libcephfs bindings added the ceph_select_filesystem function for use with multiple filesystems.

  • The cephfs python bindings now include mount_root and filesystem_name options in the mount() function.

  • erasure-code: add experimental Coupled LAYer (CLAY) erasure codes support. It features less network traffic and disk I/O when performing recovery.

  • The cache drop OSD command has been added to drop an OSD’s caches:

    • ceph tell osd.x cache drop
  • The cache status OSD command has been added to get the cache stats of an OSD:

    • ceph tell osd.x cache status
  • The libcephfs added several functions that allow restarted client to destroy or reclaim state held by a previous incarnation. These functions are for NFS servers.

  • The ceph command line tool now accepts keyword arguments in the format --arg=value or --arg value.

  • librados::IoCtx::nobjects_begin() and librados::NObjectIterator now communicate errors by throwing a std::system_error exception instead of std::runtime_error.

  • The callback function passed to LibRGWFS.readdir() now accepts a flags parameter. it will be the last parameter passed to readdir() method.

  • The cephfs-data-scan scan_links now automatically repair inotables and snaptable.

  • Configuration values mon_warn_not_scrubbed and mon_warn_not_deep_scrubbed have been renamed. They are now mon_warn_pg_not_scrubbed_ratio and mon_warn_pg_not_deep_scrubbed_ratio respectively. This is to clarify that these warnings are related to pg scrubbing and are a ratio of the related interval. These options are now enabled by default.

  • The MDS cache trimming is now throttled. Dropping the MDS cache via the ceph tell mds.<foo> cache drop command or large reductions in the cache size will no longer cause service unavailability.

  • The CephFS MDS behavior with recalling caps has been significantly improved to not attempt recalling too many caps at once, leading to instability. MDS with a large cache (64GB+) should be more stable.

  • MDS now provides a config option mds_max_caps_per_client (default: 1M) to limit the number of caps a client session may hold. Long running client sessions with a large number of caps have been a source of instability in the MDS when all of these caps need to be processed during certain session events. It is recommended to not unnecessarily increase this value.

  • The MDS config mds_recall_state_timeout has been removed. Late client recall warnings are now generated based on the number of caps the MDS has recalled which have not been released. The new configs mds_recall_warning_threshold (default: 32K) and mds_recall_warning_decay_rate (default: 60s) sets the threshold for this warning.

  • The Telegraf module for the Manager allows for sending statistics to an Telegraf Agent over TCP, UDP or a UNIX Socket. Telegraf can then send the statistics to databases like InfluxDB, ElasticSearch, Graphite and many more.

  • The graylog fields naming the originator of a log event have changed: the string-form name is now included (e.g., "name": "mgr.foo"), and the rank-form name is now in a nested section (e.g., "rank": {"type": "mgr", "num": 43243}).

  • If the cluster log is directed at syslog, the entries are now prefixed by both the string-form name and the rank-form name (e.g., mgr.x mgr.12345 ... instead of just mgr.12345 ...).

  • The JSON output of the ceph osd find command has replaced the ip field with an addrs section to reflect that OSDs may bind to multiple addresses.

  • CephFS clients without the ‘s’ flag in their authentication capability string will no longer be able to create/delete snapshots. To allow client.foo to create/delete snapshots in the bar directory of filesystem cephfs_a, use command:

    • ceph auth caps client.foo mon 'allow r' osd 'allow rw tag cephfs data=cephfs_a' mds 'allow rw, allow rws path=/bar'
  • The osd_heartbeat_addr option has been removed as it served no (good) purpose: the OSD should always check heartbeats on both the public and cluster networks.

  • The rados tool’s mkpool and rmpool commands have been removed because they are redundant; please use the ceph osd pool create and ceph osd pool rm commands instead.

  • The auid property for cephx users and RADOS pools has been removed. This was an undocumented and partially implemented capability that allowed cephx users to map capabilities to RADOS pools that they “owned”. Because there are no users we have removed this support. If any cephx capabilities exist in the cluster that restrict based on auid then they will no longer parse, and the cluster will report a health warning like:

    AUTH_BAD_CAPS 1 auth entities have invalid capabilities
        client.bad osd capability parse failed, stopped at 'allow rwx auid 123' of 'allow rwx auid 123'
    

    The capability can be adjusted with the ceph auth caps command. For example,:

    ceph auth caps client.bad osd 'allow rwx pool foo'
    
  • The ceph-kvstore-tool repair command has been renamed destructive-repair since we have discovered it can corrupt an otherwise healthy rocksdb database. It should be used only as a last-ditch attempt to recover data from an otherwise corrupted store.

  • The default memory utilization for the mons has been increased somewhat. Rocksdb now uses 512 MB of RAM by default, which should be sufficient for small to medium-sized clusters; large clusters should tune this up. Also, the mon_osd_cache_size has been increase from 10 OSDMaps to 500, which will translate to an additional 500 MB to 1 GB of RAM for large clusters, and much less for small clusters.

  • The mgr/balancer/max_misplaced option has been replaced by a new global target_max_misplaced_ratio option that throttles both balancer activity and automated adjustments to pgp_num (normally as a result of pg_num changes). If you have customized the balancer module option, you will need to adjust your config to set the new global option or revert to the default of .05 (5%).

  • By default, Ceph no longer issues a health warning when there are misplaced objects (objects that are fully replicated but not stored on the intended OSDs). You can reenable the old warning by setting mon_warn_on_misplaced to true.

  • The ceph-create-keys tool is now obsolete. The monitors automatically create these keys on their own. For now the script prints a warning message and exits, but it will be removed in the next release. Note that ceph-create-keys would also write the admin and bootstrap keys to /etc/ceph and /var/lib/ceph, but this script no longer does that. Any deployment tools that relied on this behavior should instead make use of the ceph auth export <entity-name> command for whichever key(s) they need.

  • The mon_osd_pool_ec_fast_read option has been renamed osd_pool_default_ec_fast_read to be more consistent with other osd_pool_default_* options that affect default values for newly created RADOS pools.

  • The mon addr configuration option is now deprecated. It can still be used to specify an address for each monitor in the ceph.conf file, but it only affects cluster creation and bootstrapping, and it does not support listing multiple addresses (e.g., both a v2 and v1 protocol address). We strongly recommend the option be removed and instead a single mon host option be specified in the [global] section to allow daemons and clients to discover the monitors.

  • New command ceph fs fail has been added to quickly bring down a file system. This is a single command that unsets the joinable flag on the file system and brings down all of its ranks.

  • The cache drop admin socket command has been removed. The ceph tell mds.X cache drop remains.

Detailed Changelog