Block Devices and Kubernetes

You may use Ceph Block Device images with Kubernetes v1.13 and later through ceph-csi, which dynamically provisions RBD images to back Kubernetes volumes and maps these RBD images as block devices (optionally mounting a file system contained within the image) on worker nodes running pods that reference an RBD-backed volume. Ceph stripes block device images as objects across the cluster, which means that large Ceph Block Device images have better performance than a standalone server!

To use Ceph Block Devices with Kubernetes v1.13 and higher, you must install and configure ceph-csi within your Kubernetes environment. The following diagram depicts the Kubernetes/Ceph technology stack.

Important

ceph-csi uses the RBD kernel modules by default which may not support all Ceph CRUSH tunables or RBD image features.

Create a Pool

By default, Ceph block devices use the rbd pool. Create a pool for Kubernetes volume storage. Ensure your Ceph cluster is running, then create the pool.

$ ceph osd pool create kubernetes

See Create a Pool for details on specifying the number of placement groups for your pools, and Placement Groups for details on the number of placement groups you should set for your pools.

A newly created pool must be initialized prior to use. Use the rbd tool to initialize the pool:

$ rbd pool init kubernetes

Configure ceph-csi

Setup Ceph Client Authentication

Create a new user for Kubernetes and ceph-csi. Execute the following and record the generated key:

$ ceph auth get-or-create client.kubernetes mon 'profile rbd' osd 'profile rbd pool=kubernetes' mgr 'profile rbd pool=kubernetes'
[client.kubernetes]
    key = AQD9o0Fd6hQRChAAt7fMaSZXduT3NWEqylNpmg==

Generate ceph-csi ConfigMap

The ceph-csi requires a ConfigMap object stored in Kubernetes to define the the Ceph monitor addresses for the Ceph cluster. Collect both the Ceph cluster unique fsid and the monitor addresses:

$ ceph mon dump
<...>
fsid b9127830-b0cc-4e34-aa47-9d1a2e9949a8
<...>
0: [v2:192.168.1.1:3300/0,v1:192.168.1.1:6789/0] mon.a
1: [v2:192.168.1.2:3300/0,v1:192.168.1.2:6789/0] mon.b
2: [v2:192.168.1.3:3300/0,v1:192.168.1.3:6789/0] mon.c

Note

ceph-csi currently only supports the legacy V1 protocol.

Generate a csi-config-map.yaml file similar to the example below, substituting the fsid for “clusterID”, and the monitor addresses for “monitors”:

$ cat <<EOF > csi-config-map.yaml
---
apiVersion: v1
kind: ConfigMap
data:
  config.json: |-
    [
      {
        "clusterID": "b9127830-b0cc-4e34-aa47-9d1a2e9949a8",
        "monitors": [
          "192.168.1.1:6789",
          "192.168.1.2:6789",
          "192.168.1.3:6789"
        ]
      }
    ]
metadata:
  name: ceph-csi-config
EOF

Once generated, store the new ConfigMap object in Kubernetes:

$ kubectl apply -f csi-config-map.yaml

Generate ceph-csi cephx Secret

ceph-csi requires the cephx credentials for communicating with the Ceph cluster. Generate a csi-rbd-secret.yaml file similar to the example below, using the newly created Kubernetes user id and cephx key:

$ cat <<EOF > csi-rbd-secret.yaml
---
apiVersion: v1
kind: Secret
metadata:
  name: csi-rbd-secret
  namespace: default
stringData:
  userID: kubernetes
  userKey: AQD9o0Fd6hQRChAAt7fMaSZXduT3NWEqylNpmg==
EOF

Once generated, store the new Secret object in Kubernetes:

$ kubectl apply -f csi-rbd-secret.yaml

Configure ceph-csi Plugins

Create the required ServiceAccount and RBAC ClusterRole/ClusterRoleBinding Kubernetes objects. These objects do not necessarily need to be customized for your Kubernetes environment and therefore can be used as-is from the ceph-csi deployment YAMLs:

$ kubectl apply -f https://raw.githubusercontent.com/ceph/ceph-csi/master/deploy/rbd/kubernetes/csi-provisioner-rbac.yaml
$ kubectl apply -f https://raw.githubusercontent.com/ceph/ceph-csi/master/deploy/rbd/kubernetes/csi-nodeplugin-rbac.yaml

Finally, create the ceph-csi provisioner and node plugins. With the possible exception of the ceph-csi container release version, these objects do not necessarily need to be customized for your Kubernetes environment and therefore can be used as-is from the ceph-csi deployment YAMLs:

$ wget https://raw.githubusercontent.com/ceph/ceph-csi/master/deploy/rbd/kubernetes/csi-rbdplugin-provisioner.yaml
$ kubectl apply -f csi-rbdplugin-provisioner.yaml
$ wget https://raw.githubusercontent.com/ceph/ceph-csi/master/deploy/rbd/kubernetes/csi-rbdplugin.yaml
$ kubectl apply -f csi-rbdplugin.yaml

Important

The provisioner and node plugin YAMLs will, by default, pull the development release of the ceph-csi container (quay.io/cephcsi/cephcsi:canary). The YAMLs should be updated to use a release version container for production workloads.

Using Ceph Block Devices

Create a StorageClass

The Kubernetes StorageClass defines a class of storage. Multiple StorageClass objects can be created to map to different quality-of-service levels (i.e. NVMe vs HDD-based pools) and features.

For example, to create a ceph-csi StorageClass that maps to the kubernetes pool created above, the following YAML file can be used after ensuring that the “clusterID” property matches your Ceph cluster’s fsid:

$ cat <<EOF > csi-rbd-sc.yaml
---
apiVersion: storage.k8s.io/v1
kind: StorageClass
metadata:
   name: csi-rbd-sc
provisioner: rbd.csi.ceph.com
parameters:
   clusterID: b9127830-b0cc-4e34-aa47-9d1a2e9949a8
   pool: kubernetes
   csi.storage.k8s.io/provisioner-secret-name: csi-rbd-secret
   csi.storage.k8s.io/provisioner-secret-namespace: default
   csi.storage.k8s.io/node-stage-secret-name: csi-rbd-secret
   csi.storage.k8s.io/node-stage-secret-namespace: default
reclaimPolicy: Delete
mountOptions:
   - discard
EOF
$ kubectl apply -f csi-rbd-sc.yaml

Create a PersistentVolumeClaim

A PersistentVolumeClaim is a request for abstract storage resources by a user. The PersistentVolumeClaim would then be associated to a Pod resource to provision a PersistentVolume, which would be backed by a Ceph block image. An optional volumeMode can be included to select between a mounted file system (default) or raw block device-based volume.

Using ceph-csi, specifying Filesystem for volumeMode can support both ReadWriteOnce and ReadOnlyMany accessMode claims, and specifying Block for volumeMode can support ReadWriteOnce, ReadWriteMany, and ReadOnlyMany accessMode claims.

For example, to create a block-based PersistentVolumeClaim that utilizes the ceph-csi-based StorageClass created above, the following YAML can be used to request raw block storage from the csi-rbd-sc StorageClass:

$ cat <<EOF > raw-block-pvc.yaml
---
apiVersion: v1
kind: PersistentVolumeClaim
metadata:
  name: raw-block-pvc
spec:
  accessModes:
    - ReadWriteOnce
  volumeMode: Block
  resources:
    requests:
      storage: 1Gi
  storageClassName: csi-rbd-sc
EOF
$ kubectl apply -f raw-block-pvc.yaml

The following demonstrates and example of binding the above PersistentVolumeClaim to a Pod resource as a raw block device:

$ cat <<EOF > raw-block-pod.yaml
---
apiVersion: v1
kind: Pod
metadata:
  name: pod-with-raw-block-volume
spec:
  containers:
    - name: fc-container
      image: fedora:26
      command: ["/bin/sh", "-c"]
      args: ["tail -f /dev/null"]
      volumeDevices:
        - name: data
          devicePath: /dev/xvda
  volumes:
    - name: data
      persistentVolumeClaim:
        claimName: raw-block-pvc
EOF
$ kubectl apply -f raw-block-pod.yaml

To create a file-system-based PersistentVolumeClaim that utilizes the ceph-csi-based StorageClass created above, the following YAML can be used to request a mounted file system (backed by an RBD image) from the csi-rbd-sc StorageClass:

$ cat <<EOF > pvc.yaml
---
apiVersion: v1
kind: PersistentVolumeClaim
metadata:
  name: rbd-pvc
spec:
  accessModes:
    - ReadWriteOnce
  volumeMode: Filesystem
  resources:
    requests:
      storage: 1Gi
  storageClassName: csi-rbd-sc
EOF
$ kubectl apply -f pvc.yaml

The following demonstrates and example of binding the above PersistentVolumeClaim to a Pod resource as a mounted file system:

$ cat <<EOF > pod.yaml
---
apiVersion: v1
kind: Pod
metadata:
  name: csi-rbd-demo-pod
spec:
  containers:
    - name: web-server
      image: nginx
      volumeMounts:
        - name: mypvc
          mountPath: /var/lib/www/html
  volumes:
    - name: mypvc
      persistentVolumeClaim:
        claimName: rbd-pvc
        readOnly: false
EOF
$ kubectl apply -f pod.yaml