Changelog¶
2.1¶
2.1.0¶
02-Oct-2020
- add Python3 support
- build python2-ceph-deploy and python3-ceph-deply rpm packages
2.0¶
2.0.1¶
19-Jun-2018
- Add support for archlinux
- Support IPV6 addresses in monitors
- Add debug argument when calling disk zap
- Ensure remote executables are files (vs. possible dirs)
- Run
apt-get update
before installs - Default to mimic release
- Use INFO log levels for disk list
- Fix
UnboundLocalError
when createing mds/mgr with bad hosts - Improve distro detection for Arch Linux
- Add epilog text
2.0.0¶
16-Jan-2018
- Backward incompatible API changes for OSD creation - will use ceph-volume and no longer consume ceph-disk.
- Remove python-distribute dependency
- Use /etc/os-release as a fallback when
linux_distribution()
doesn’t work - Drop dmcrypt support (unsupported by ceph-volume for now)
- Allow debug modes for ceph-volume
1.5¶
1.5.39¶
1-Sep-2017
- Remove
--cluster
options, default toceph
always - Add
--filestore
sinceceph-disk
defaults to bluestore - Start testing against Python 3.5
- Support Debian 9 and 10 intalls
- Better handling on package conflicts when upgrading/re-installing
1.5.38¶
19-May-2017
- Allow unsigned deb packages from mirrors
- Detect systemd before sysvinit in centos
- Fix UnboundLocalError when installing in debian with custom repo flags
- gatherkeys to give mgr “allow * ” permissions
- specify block.db and block.wal for bluestore
- be able to install ceph-mgr
- bootstrap mgr keys
- cleanup mds key creation
- Virtuozzo Linux support
- update osd and mds caps
1.5.37¶
03-Jan-2017
- Use the
--cluster
flag on monitor commands (defaulting to ‘ceph’ if unspecfied) - After adding a monitor, ensure it is started regardless of init system
- Allow Oracle Linux Server to be deployed to.
- Fix issue when calling gatherkeys where a log argument was missing
- Use the new development services for installation (from chacra.ceph.com and shaman.ceph.com URLs)
- Try to decode bytes only on Python 3 when writing files on remote hosts
1.5.36¶
29-Aug-2016
- Prefer to use
load_raw
to avoid mangling ceph.conf content. - Improve systemd/sysvinit detection for both CentOS and RHEL
- Gatherkeys should try to get an existing key without caps, in case they don’t match
1.5.35¶
15-Aug-2016
- Add compatibility for bytes/strings with Python 3
- Fix errors in argparse default behavior (error messages, incomplete commands)
- Add Python 3.4 to tox
- Python 3 changes to workaround configparser issues
- Use the configured username when using rsync to a remote host (local repo support)
- Install Python 3 with the bootstrap sciprt
- Bump remoto requirement to 0.0.29
- Include admin.rst and gatherkeys.rst in the TOC index
- Handle Ceph package split in Ubuntu
- Add a
--nogpgcheck
option to disable checks on local repos - Improve sysvinit/systemd checks by not including ‘ceph’ in the path
- Install Diamond when calling
ceph-deploy calamari connect
- Zypper fixes for purging: allows removal of multiple packages
07-Jun-2016 1.5.34 ^^^^^^ 07-Jun-2016
- Do not call partx/partprobe when zapping disks
- No longer allow using ext4
- Default to systemd for SUSE
- Remove usage of rcceph (for SUSE)
- No longer depend on automatic
ceph-create-keys
, use the monitors to fetch keys. - Use
0.0.28
from remoto
1.5.32¶
13-Apr-2016
- Improve systemd detection for Ubuntu releases.
- Rename ceph-deploy log to include the cluster name
- Bluestore support
- Disable timeouts for pkg install/remove operations (they can take a long time)
- Remove deprecated ceph.conf configuration “filestore xattr use omap = true”
1.5.31¶
04-Jan-2016
- Use the new remoto version (0.0.27) that fixes an error when dealing with remote output.
1.5.30¶
11-Dec-2015
- Default to the “infernalis” release.
- Fix an issue when trying to destroy/stop monitors on systemd servers
1.5.29¶
2-Dec-2015
- Add support for
--dev-commit <sha1>
- Add
--test
option for installing ceph-test package - Enable Ceph on
osd create
- Remove bootstrap-rgw key when forgetkeys is used
- Prefer systemd over upstart in newer Ubuntu
- Use download.ceph.com directly
- Use better examples in default cephdeploy.conf file
- Cleanup functions for uninstall and purge (simplifying code)
- Use https for download.cep.com
- Fix gitbuilder hosts to avoid using https
- Do not udevadm trigger because ceph-disk does it already
- Download gpg keys from download.ceph.com
- Specify a PID location for monitors
- Fix invalid path for release keys in test
- Add timestamp to log output
1.5.28¶
26-Aug-2015
- Fix issue when importing GPG keys on Centos 6 introduced in 1.5.27.
- Support systemd and sysvinit on RHEL, Fedora, and CentOS, when systemd is present in the Ceph packages.
- Simplify steps taken when adding a monitor with
ceph-deploy mon add
. Eliminates a 5-minute hang when moving from 1 monitor to 2. - Make sure that Ceph is installed on a remote node before trying to enable a Ceph daemon.
1.5.27¶
05-Aug-2015
- New
repo
top-level command for adding and removing repos. - Ability to install subset of ceph packages based on CLI switches like
--cli
,--rgw
, etc. - Initial support for systemd. Ceph on Fedora 22 only.
- Fixed an issue that prevented package upgrades when using DNF.
- No longer installs yum-priorities-plugin when using DNF.
1.5.26¶
20-Jul-2015
- Make parsing of boolean values in config file overrides work.
- Output value of all ceph-deploy options upon invocation.
- Point to git.ceph.com for GPG keys.
- Make GPG key fetching work on Debian Wheezy.
- Allow ceph-deploy to work on Mint distro.
- Improved help menu output during subcommand context.
- Point to SUSE downstream packages by default on SUSE distros since ceph.com does not host packages for SUSE anymore..
- Some initial groundwork for installing Ceph daemons that will no longer run as root user.
- Add support for DNF package manager (Fedora >= 22 only).
- Echo RGW default port number after
ceph-deploy rgw create
.
1.5.25¶
26-May-2015
- CVE-2015-4053: Make sure that the admin keyring is mode 0600 after being
pushed with the
ceph-deploy admin
command. - Improved SUSE install and purge.
- Make sure that package name ‘ceph-radosgw’ is used everywhere for RPM systems instead of ‘radosgw’.
1.5.24¶
18-May-2015
- Use version 0.0.25 of
remoto
that fixes an issue where output would be cut (https://github.com/alfredodeza/remoto/issues/15). - Automatically prefix custom RGW daemon names with ‘rgw.’
- Log an error message when deploying MDS in RHEL distros fails as it may not be supported.
- More robust vendor.py script (tries ceph.com and GitHub)
- Create /var/lib/ceph/radosgw directory on remote host if not present
- Enable/start ceph-radosgw service on RPM systems instead of radosgw
- Add flags to support install of specific daemons (OSD, MON, RGW, MDS) only Note that the packaging changes for this in upstream Ceph are still pending
- removing installation of ‘calamari-minions’ repo upon ‘ceph-deploy calamari connect’
- enable ceph-mds service correctly on systemd
- Check for sysvinit and custom cluster name on ‘ceph-deploy new’ command
1.5.23¶
07-Apr-2015
- Default to Hammer on install.
- Add
rgw
command to easily create rgw instances. - Automatically install the radosgw package.
- Remove unimplemented subcommands from CLI and help.
- CVE-2015-3010: Fix an issue where keyring permissions were world readable (thanks Owen Synge).
- Fix an issue preventing all but the first host given to
install --repo
from being used.
1.5.22¶
09-Mar-2015
- Enable
check_obsoletes
in Yum priorities plugin when deploying upstream Ceph on RPM-based distros. - Require
--release
flag to install upstream Ceph on RHEL. - Uninstall
ceph-common
on Fedora.
1.5.21¶
10-Dec-2014
- Fix distro detection for CentOS and Scientific Linux, which was preventing installation of EPEL repo as a prerequisite.
- Default to Giant on install.
- Fix an issue where
gatherkeys
did not exit non-zero when keys were not found.
1.5.18¶
09-Oct-2014
- Fix issue for enabling the OSD service in el-like distros.
- Create a monitor keyring if it doesn’t exist.
1.5.17¶
06-Oct-2014
- Do not ask twice for passwords when calling
new
. - Ensure priorities are installed and enforced for custom repositories.
1.5.16¶
30-Sep-2014
- Enable services on
el
distros when deploying Ceph daemons. - Smarter detection of
sudo
need on remote nodes (prevents issues when running ceph-deploy asroot
or withsudo
. - Fix an issue where Debian Sid would break ceph-deploy failing Distro detection.
1.5.14¶
09-Sep-2014
- Do not override environment variables on remote hosts, preserve them and
extend the
$PATH
if not explicitly told not to.
1.5.13¶
03-Sep-2014
- Fix missing priority plugin in YUM for Fedora when installing
- Implement –public-network and –cluster-network with remote IP validation
- Fixed an issue where errors before the logger was setup would be silenced.
1.5.12¶
25-Aug-2014
- Better traceback reporting with logging.
- Close stderr/stdout when ceph-deploy completes operations (silences odd tracebacks)
- Allow to re-use a ceph.conf file with
--ceph-conf
global flag - Be able to concatenate and seed keyring files with
--keyrings
1.5.11¶
25-Aug-2014
- Fix a problem where CentOS7 is not matched correctly against repos (Thanks Tom Walsh)
1.5.10¶
31-Jul-2014
- Use
ceph-disk
with high verbosity - Don’t require
ceph-common
on EL distros - Use
ceph-disk zap
instead of re-implementing it - Use proper paths for
zypper
(Thanks Owen Synge) - More robust
init
detection for Ubuntu (Thanks Joao Eduardo Luis) - Allow to install repo files only
- Work with inconsistent repo sections for Emperor when setting priorities
1.5.9¶
14-Jul-2014
- Allow to optionally set the
fsid
when callingnew
- Correctly select sysvinit or systemd for Suse versions (Thanks Owen Synge)
- Use correct version of remoto (
0.0.19
) that holds theNone
global fix - Fix new naming scheme for CentOS platforms that prevented CentOS 7 installs
1.5.8¶
09-Jul-2014
- Create a flake8/pep8/linting job so that we prevent Undefined errors
- Add partprobe/partx calls when zapping disks
- Fix RHEL7 installation issues (url was using el6 incorrectly) (Thanks David Vossel)
- Warn when an executable is not found
- Fix an
AttributeError
in execnet (see https://github.com/alfredodeza/execnet/issues/1)
1.5.7¶
01-Jul-2014
- Fix
NameError
on osd.py from an undefined variable - Fix a calamari connect problem when installing on multiple hosts
1.5.6¶
01-Jul-2014
- Optionally avoid vendoring libraries for upstream package maintainers.
- Fix RHEL7 installation issue that was pulling
el6
packages (Thanks David Vossel)
1.5.4¶
10-Jun-2014
- Improve help by adding online doc link
- allow cephdeploy.conf to set priorities in repos
- install priorities plugin for yum distros
- set the right priority for ceph.repo and warn about this
1.5.3¶
30-May-2014
- Another fix for IPV6: write correct
mon_host
in ceph.conf - Support
proxy
settings for repo files in YUM - Better error message when ceph.conf is not found
- Refuse to install custom cluster names on sysvinit systems (not supported)
- Remove quiet flags from package manager’s install calls to avoid timing out
- Use the correct URL repo when installing for RHEL
1.5.2¶
09-May-2014
- Remove
--
from the command to install packages. (Thanks Vincenzo Pii) - Default to Firefly as the latest, stable Ceph version
1.5.0¶
28-Apr-2014
- Warn if
requiretty
is causing issues - Support IPV6 host resolution (Thanks Frode Nordahl)
- Fix incorrect paths for local cephdeploy.conf
- Support subcommand overrides defined in cephdeploy.conf
- When installing on CentOS/RHEL call
yum clean all
- Check OSD status when deploying to catch possible issues
- Add a
--local-mirror
flag for installation that syncs files - Implement
osd list
to list remote osds - Fix install issues on Suse (Thanks Owen Synge)
1.4¶
1.4.0¶
- uninstall ceph-release and clean cache in CentOS
- Add ability to add monitors to an existing cluster
- Deprecate use of
--stable
for releases, introduce--release
- Eat some tracebacks that may appear when closing remote connections
- Enable default ceph-deploy configurations for repo handling
- Fix wrong URL for rpm installs with
--testing
flag
1.3¶
1.3.5¶
- Support Debian SID for installs
- Error nicely when hosts cannot be resolved
- Return a non-zero exit status when monitors have not formed quorum
- Use the new upstream library for remote connections (execnet 1.2)
- Ensure proper read permissions for ceph.conf when pushing configs
- clean up color logging for non-tty sessions
- do not reformat configs when pushing, pushes are now as-is
- remove dry-run flag that did nothing
1.3.4¶
/etc/ceph
now gets completely removed when usingpurgedata
.- Refuse to perform
purgedata
if ceph is installed - Add more details when a given platform is not supported
- Use new Ceph auth settings for
ceph.conf
- Remove old journal size settings from
ceph.conf
- Add a new subcommand:
pkg
to install/remove packages from hosts
1.3.3¶
- Add repo mirror support with
--repo-url
and--gpg-url
- Remove dependency on the
which
command - Fix problem when removing
/var/lib/ceph
and OSDs are still mounted - Make sure all tmp files are closed before moving, fixes issue when creating keyrings and conf files
- Complete remove the lsb module
1.3.2¶
ceph-deploy new
will now attempt to copy SSH keys if necessary unless it it disabled.- Default to Emperor version of ceph when installing.
1.3.1¶
- Use
shutil.move
to overwrite files from temporary ones (Thanks Mark Kirkwood) - Fix failure to
wget
GPG keys on Debian and Debian-based distros when installing
1.3.0¶
- Major refactoring for all the remote connections in ceph-deploy. With global and granular timeouts.
- Raise the log level for missing keyrings
- Allow
--username
to be used for connecting over SSH - Increase verbosity when MDS fails, include the exit code
- Do not remove
/etc/ceph
, just the contents - Use
rcceph
instead of service for SUSE - Fix lack of
--cluster
usage on monitor error checks - ensure we correctly detect Debian releases
1.2¶
1.2.7¶
- Ensure local calls to ceph-deploy do not attempt to ssh.
mon create-initial
command to deploy all defined mons, wait for them to form quorum and finally to gatherkeys.- Improve help menu for mon commands.
- Add
--fs-type
option todisk
andosd
commands (Thanks Benoit Knecht) - Make sure we are using
--cluster
for remote configs when starting ceph - Fix broken
mon destroy
calls using the new hostname resolution helper - Add a helper to catch common monitor errors (reporting the status of a mon)
- Normalize all configuration options in ceph-deploy (Thanks Andrew Woodward)
- Use a
cuttlefish
compatiblemon_status
command - Make
osd activate
use the new remote connection libraries for improved readability. - Make
disk zap
also use the new remote connection libraries. - Handle any connection errors that may came up when attempting to get into remote hosts.
1.2.6¶
- Fixes a problem witha closed connection for Debian distros when creating a mon.
1.2.5¶
- Fix yet another hanging problem when starting monitors. Closing the connection now before we even start them.
1.2.4¶
- Improve
osd help
menu with path information - Really discourage the use of
ceph-deploy new [IP]
- Fix hanging remote requests
- Add
mon status
output when creating monitors - Fix Debian install issue (wrong parameter order) (Thanks Sayid Munawar)
osd
commands will be more verbose when deploying them- Issue a warning when provided hosts do not match
hostname -s
remotely - Create two flags for altering/not-altering source repos at install time:
--adjust-repos
and--no-adjust-repos
- Do not do any
sudo
commands if user is root - Use
mon status
for everymon
deployment and detect problems with monitors. - Allow to specify
host:fqdn/ip
for all mon commands (Thanks Dmitry Borodaenko) - Be consistent for hostname detection (Thanks Dmitry Borodaenko)
- Fix hanging problem on remote hosts
1.2.3¶
- Fix non-working
disk list
check_call
utility fixes$PATH
issues.- Use proper exit codes from the
main()
CLI function - Do not error when attempting to add the EPEL repos.
- Do not complain when using IP:HOST pairs
- Report nicely when
HOST:DISK
is not used when zapping.
1.2.2¶
- Do not force usage of lsb_release, fallback to
platform.linux_distribution()
- Ease installation in CentOS/Scientific by adding the EPEL repo before attempting to install Ceph.
- Graceful handling of pushy connection issues due to host address resolution
- Honor the usage of
--cluster
when calling osd prepare.
1.2.1¶
- Print the help when no arguments are passed
- Add a
--version
flag - Show the version in the help menu
- Catch
DeployError
exceptions nicely with the logger - Fix blocked command when calling
mon create
- default to
dumpling
for installs - halt execution on remote exceptions
1.2.0¶
- Better logging output
- Remote logging for individual actions for
install
andmon create
- Install
ca-certificates
on all Debian-based distros - Honor the usage of
--cluster
- Do not
rm -rf
monitor logs when destroying - Error out when
ceph-deploy new [IP]
is used - Log the ceph version when installing