Manual ceph-iscsi-cli Installation

Requirements

The following packages will be used by ceph-iscsi-cli and target tools. They must be installed from your Linux distribution’s software repository on each machine that will be a iSCSI gateway:

  • libnl3

  • libkmod

  • librbd1

  • pyparsing

  • python kmod

  • python pyudev

  • python gobject

  • python kmod

  • python pyudev

  • python gobject

  • python urwid

  • python pyparsing

  • python rados

  • python rbd

  • python netaddr

  • python netifaces

  • python crypto

  • python requests

  • python flask

  • pyOpenSSL

Packages

  • Linux Kernel

    If not using a distro kernel that contains the required Ceph iSCSI patches, then Linux kernel v4.16 or newer or the ceph-client ceph-iscsi-test branch must be used. To get the branch run:

    > git clone https://github.com/ceph/ceph-client.git
> git checkout ceph-iscsi-test

    Warning

    ceph-iscsi-test is not for production use. It should only be used for proof of concept setups and testing. The kernel is only updated with Ceph iSCSI patches. General security and bug fixes from upstream are not applied.

    Check your distro’s docs for specific instructions on how to build a kernel. The only Ceph iSCSI specific requirements are the following build options must be enabled:

    CONFIG_TARGET_CORE=m
CONFIG_TCM_USER2=m
CONFIG_ISCSI_TARGET=m

  • tcmu-runner

    Installation:

    > git clone https://github.com/open-iscsi/tcmu-runner
> cd tcmu-runner

    Ceph iSCSI requires systemd so the following build command must be used:

    > cmake -Dwith-glfs=false -Dwith-qcow=false -DSUPPORT_SYSTEMD=ON -DCMAKE_INSTALL_PREFIX=/usr
> make install

    Enable and start the daemon:

    > systemctl daemon-reload
> systemctl enable tcmu-runner
> systemctl start tcmu-runner

  • rtslib-fb

    Installation:

    > git clone https://github.com/open-iscsi/rtslib-fb.git
> cd rtslib-fb
> python setup.py install

  • configshell-fb

    Installation:

    > git clone https://github.com/open-iscsi/configshell-fb.git
> cd configshell-fb
> python setup.py install

  • targetcli-fb

    Installation:

    > git clone https://github.com/open-iscsi/targetcli-fb.git
> cd targetcli-fb
> python setup.py install
> mkdir /etc/target
> mkdir /var/target

    Warning

    The ceph-iscsi tools assume they are managing all targets on the system. If targets have been setup and are being managed by targetcli the target service must be disabled.

  • ceph-iscsi-config

    Installation:

    > git clone https://github.com/ceph/ceph-iscsi-config.git
> cd ceph-iscsi-config
> python setup.py install
> cp usr/lib/systemd/system/rbd-target-gw.service /lib/systemd/system

    Enable and start the daemon:

    > systemctl daemon-reload
> systemctl enable rbd-target-gw
> systemctl start rbd-target-gw

  • ceph-iscsi-cli

    Installation:

    > git clone https://github.com/ceph/ceph-iscsi-cli.git
> cd ceph-iscsi-cli
> python setup.py install
> cp usr/lib/systemd/system/rbd-target-api.service /lib/systemd/system

Installation is complete. Proceed to the setup section in the main ceph-iscsi-cli page.