RBD on Windows

The rbd command can be used to create, remove, import, export, map or unmap images exactly like it would on Linux. Make sure to check the RBD basic commands guide.

librbd.dll is also available for applications that can natively use Ceph.

Please check the installation guide to get started.

Windows service

On Windows, rbd-wnbd daemons are managed by a centralized service. This allows decoupling the daemons from the Windows session from which they originate. At the same time, the service is responsible of recreating persistent mappings, usually when the host boots.

Note that only one such service may run per host.

By default, all image mappings are persistent. Non-persistent mappings can be requested using the -onon-persistent rbd flag.

Persistent mappings are recreated when the service starts, unless explicitly unmapped. The service disconnects the mappings when being stopped. This also allows adjusting the Windows service start order so that RBD images can be mapped before starting services that may depend on it, such as VMMS.

In order to be able to reconnect the images, rbd-wnbd stores mapping information in the Windows registry at the following location: SYSTEM\CurrentControlSet\Services\rbd-wnbd.

The following command can be used to configure the service. Please update the rbd-wnbd.exe path accordingly:

New-Service -Name "ceph-rbd" `
            -Description "Ceph RBD Mapping Service" `
            -BinaryPathName "c:\ceph\rbd-wnbd.exe service" `
            -StartupType Automatic

Note that the Ceph MSI installer takes care of creating the ceph-rbd Windows service.

Usage

Integration

RBD images can be exposed to the OS and host Windows partitions or they can be attached to Hyper-V VMs in the same way as iSCSI disks.

Starting with Openstack Wallaby, the Nova Hyper-V driver can attach RBD Cinder volumes to Hyper-V VMs.

Mapping images

The workflow and CLI is similar to the Linux counterpart, with a few notable differences:

  • device paths cannot be requested. The disk number and path will be picked by Windows. If a device path is provided by the used when mapping an image, it will be used as an identifier, which can also be used when unmapping the image.

  • the show command was added, which describes a specific mapping. This can be used for retrieving the disk path.

  • the service command was added, allowing rbd-wnbd to run as a Windows service. All mappings are by default persistent, being recreated when the service stops, unless explicitly unmapped. The service disconnects the mappings when being stopped.

  • the list command also includes a status column.

The purpose of the service mode is to ensure that mappings survive reboots and that the Windows service start order can be adjusted so that RBD images can be mapped before starting services that may depend on it, such as VMMS.

The mapped images can either be consumed by the host directly or exposed to Hyper-V VMs.

Hyper-V VM disks

The following sample imports an RBD image and boots a Hyper-V VM using it:

# Feel free to use any other image. This one is convenient to use for
# testing purposes because it's very small (~15MB) and the login prompt
# prints the pre-configured password.
wget http://download.cirros-cloud.net/0.5.1/cirros-0.5.1-x86_64-disk.img `
     -OutFile cirros-0.5.1-x86_64-disk.img

# We'll need to make sure that the imported images are raw (so no qcow2 or vhdx).
# You may get qemu-img from https://cloudbase.it/qemu-img-windows/
# You can add the extracted location to $env:Path or update the path accordingly.
qemu-img convert -O raw cirros-0.5.1-x86_64-disk.img cirros-0.5.1-x86_64-disk.raw

rbd import cirros-0.5.1-x86_64-disk.raw
# Let's give it a hefty 100MB size.
rbd resize cirros-0.5.1-x86_64-disk.raw --size=100MB

rbd device map cirros-0.5.1-x86_64-disk.raw

# Let's have a look at the mappings.
rbd device list
Get-Disk

$mappingJson = rbd-wnbd show cirros-0.5.1-x86_64-disk.raw --format=json
$mappingJson = $mappingJson | ConvertFrom-Json

$diskNumber = $mappingJson.disk_number

New-VM -VMName BootFromRBD -MemoryStartupBytes 512MB
# The disk must be turned offline before it can be passed to Hyper-V VMs
Set-Disk -Number $diskNumber -IsOffline $true
Add-VMHardDiskDrive -VMName BootFromRBD -DiskNumber $diskNumber
Start-VM -VMName BootFromRBD

Windows partitions

The following sample creates an empty RBD image, attaches it to the host and initializes a partition:

rbd create blank_image --size=1G
rbd device map blank_image -onon-persistent

$mappingJson = rbd-wnbd show blank_image --format=json
$mappingJson = $mappingJson | ConvertFrom-Json

$diskNumber = $mappingJson.disk_number

# The disk must be online before creating or accessing partitions.
Set-Disk -Number $diskNumber -IsOffline $false

# Initialize the disk, partition it and create a filesystem.
Get-Disk -Number $diskNumber | `
    Initialize-Disk -PassThru | `
    New-Partition -AssignDriveLetter -UseMaximumSize | `
    Format-Volume -Force -Confirm:$false

Limitations

CSV support

At the moment, the Microsoft Failover Cluster can’t use WNBD disks as Cluster Shared Volumes (CSVs) underlying storage. The main reason is that WNBD and rbd-wnbd don’t support the SCSI Persistent Reservations feature yet.

Hyper-V disk addressing

Warning

Hyper-V identifies passthrough VM disks by number instead of SCSI ID, although the disk number can change across host reboots. This means that the VMs can end up using incorrect disks after rebooting the host, which is an important security concern. This issue also affects iSCSI and Fibre Channel disks.

There are a few possible ways of avoiding this Hyper-V limitation:

  • use an NTFS/ReFS partition to store VHDX image files instead of directly attaching the RBD image. This may slightly impact the IO performance.

  • use the Hyper-V AutomaticStartAction setting to prevent the VMs from booting with the incorrect disks and have a script that updates VM disks attachments before powering them back on. The ElementName field of the Msvm_StorageAllocationSettingData WMI class may be used to label VM disk attachments.

  • use the Openstack Hyper-V driver, which automatically refreshes the VM disk attachments before powering them back on.

Troubleshooting

Please consult the Windows troubleshooting page.