ceph-volume – Ceph OSD deployment and inspection tool¶
Synopsis¶
Description¶
ceph-volume is a single purpose command line tool to deploy logical
volumes as OSDs, trying to maintain a similar API to ceph-disk
when
preparing, activating, and creating OSDs.
It deviates from ceph-disk
by not interacting or relying on the udev rules
that come installed for Ceph. These rules allow automatic detection of
previously setup devices that are in turn fed into ceph-disk
to activate
them.
Commands¶
inventory¶
This subcommand provides information about a host’s physical disc inventory and reports metadata about these discs. Among this metadata one can find disc specific data items (like model, size, rotational or solid state) as well as data items specific to ceph using a device, such as if it is available for use with ceph or if logical volumes are present.
Examples:
ceph-volume inventory
ceph-volume inventory /dev/sda
ceph-volume inventory --format json-pretty
Optional arguments:
[-h, –help] show the help message and exit
- [–format] report format, valid values are
plain
(default), json
andjson-pretty
- [–format] report format, valid values are
lvm¶
By making use of LVM tags, the lvm
sub-command is able to store and later
re-discover and query devices associated with OSDs so that they can later
activated.
Subcommands:
batch
Creates OSDs from a list of devices using a filestore
or bluestore
(default) setup. It will create all necessary volume groups
and logical volumes required to have a working OSD.
Example usage with three devices:
ceph-volume lvm batch --bluestore /dev/sda /dev/sdb /dev/sdc
Optional arguments:
[-h, –help] show the help message and exit
[–bluestore] Use the bluestore objectstore (default)
[–filestore] Use the filestore objectstore
[–yes] Skip the report and prompt to continue provisioning
[–prepare] Only prepare OSDs, do not activate
[–dmcrypt] Enable encryption for the underlying OSD devices
[–crush-device-class] Define a CRUSH device class to assign the OSD to
[–no-systemd] Do not enable or create any systemd units
- [–report] Report what the potential outcome would be for the
current input (requires devices to be passed in)
- [–format] Output format when reporting (used along with
–report), can be one of ‘pretty’ (default) or ‘json’
- [–block-db-size] Set (or override) the “bluestore_block_db_size” value,
in bytes
[–journal-size] Override the “osd_journal_size” value, in megabytes
Required positional arguments:
- <DEVICE> Full path to a raw device, like
/dev/sda
. Multiple <DEVICE>
paths can be passed in.
- <DEVICE> Full path to a raw device, like
activate
Enables a systemd unit that persists the OSD ID and its UUID (also called
fsid
in Ceph CLI tools), so that at boot time it can understand what OSD is
enabled and needs to be mounted.
Usage:
ceph-volume lvm activate --bluestore <osd id> <osd fsid>
Optional Arguments:
[-h, –help] show the help message and exit
[–auto-detect-objectstore] Automatically detect the objectstore by inspecting the OSD
[–bluestore] bluestore objectstore (default)
[–filestore] filestore objectstore
[–all] Activate all OSDs found in the system
[–no-systemd] Skip creating and enabling systemd units and starting of OSD services
Multiple OSDs can be activated at once by using the (idempotent) --all
flag:
ceph-volume lvm activate --all
prepare
Prepares a logical volume to be used as an OSD and journal using a filestore
or bluestore
(default) setup. It will not create or modify the logical volumes
except for adding extra metadata.
Usage:
ceph-volume lvm prepare --filestore --data <data lv> --journal <journal device>
Optional arguments:
[-h, –help] show the help message and exit
[–journal JOURNAL] A logical group name, path to a logical volume, or path to a device
[–bluestore] Use the bluestore objectstore (default)
[–block.wal] Path to a bluestore block.wal logical volume or partition
[–block.db] Path to a bluestore block.db logical volume or partition
[–filestore] Use the filestore objectstore
[–dmcrypt] Enable encryption for the underlying OSD devices
[–osd-id OSD_ID] Reuse an existing OSD id
[–osd-fsid OSD_FSID] Reuse an existing OSD fsid
[–crush-device-class] Define a CRUSH device class to assign the OSD to
Required arguments:
- --data
A logical group name or a path to a logical volume
For encrypting an OSD, the --dmcrypt
flag must be added when preparing
(also supported in the create
sub-command).
create
Wraps the two-step process to provision a new osd (calling prepare
first
and then activate
) into a single one. The reason to prefer prepare
and
then activate
is to gradually introduce new OSDs into a cluster, and
avoiding large amounts of data being rebalanced.
The single-call process unifies exactly what prepare
and activate
do,
with the convenience of doing it all at once. Flags and general usage are
equivalent to those of the prepare
and activate
subcommand.
trigger
This subcommand is not meant to be used directly, and it is used by systemd so
that it proxies input to ceph-volume lvm activate
by parsing the
input from systemd, detecting the UUID and ID associated with an OSD.
Usage:
ceph-volume lvm trigger <SYSTEMD-DATA>
The systemd “data” is expected to be in the format of:
<OSD ID>-<OSD UUID>
The lvs associated with the OSD need to have been prepared previously, so that all needed tags and metadata exist.
Positional arguments:
<SYSTEMD_DATA> Data from a systemd unit containing ID and UUID of the OSD.
list List devices or logical volumes associated with Ceph. An association is determined if a device has information relating to an OSD. This is verified by querying LVM’s metadata and correlating it with devices.
The lvs associated with the OSD need to have been prepared previously by ceph-volume so that all needed tags and metadata exist.
Usage:
ceph-volume lvm list
List a particular device, reporting all metadata about it:
ceph-volume lvm list /dev/sda1
List a logical volume, along with all its metadata (vg is a volume group, and lv the logical volume name):
ceph-volume lvm list {vg/lv}
Positional arguments:
<DEVICE> Either in the form of
vg/lv
for logical volumes,/path/to/sda1
or/path/to/sda
for regular devices.
zap Zaps the given logical volume or partition. If given a path to a logical volume it must be in the format of vg/lv. Any filesystems present on the given lv or partition will be removed and all data will be purged.
However, the lv or partition will be kept intact.
Usage, for logical volumes:
ceph-volume lvm zap {vg/lv}
Usage, for logical partitions:
ceph-volume lvm zap /dev/sdc1
For full removal of the device use the --destroy
flag (allowed for all
device types):
ceph-volume lvm zap --destroy /dev/sdc1
Multiple devices can be removed by specifying the OSD ID and/or the OSD FSID:
ceph-volume lvm zap --destroy --osd-id 1
ceph-volume lvm zap --destroy --osd-id 1 --osd-fsid C9605912-8395-4D76-AFC0-7DFDAC315D59
Positional arguments:
<DEVICE> Either in the form of
vg/lv
for logical volumes,/path/to/sda1
or/path/to/sda
for regular devices.
new-wal Attaches the given logical volume to OSD as a WAL. Logical volume name format is vg/lv. Fails if OSD has already got attached WAL.
Usage:
ceph-volume lvm new-wal --osd-id OSD_ID --osd-fsid OSD_FSID --target TARGET_LV
Optional arguments:
[-h, –help] show the help message and exit
Required arguments:
- --osd-id OSD_ID
OSD id to attach new WAL to
- --osd-fsid OSD_FSID
OSD fsid to attach new WAL to
- --target TARGET_LV
logical volume name to attach as WAL
new-db Attaches the given logical volume to OSD as a DB. Logical volume name format is vg/lv. Fails if OSD has already got attached DB.
Usage:
ceph-volume lvm new-db --osd-id OSD_ID --osd-fsid OSD_FSID --target <target lv>
Optional arguments:
[-h, –help] show the help message and exit
Required arguments:
- --osd-id OSD_ID
OSD id to attach new DB to
- --osd-fsid OSD_FSID
OSD fsid to attach new DB to
- --target TARGET_LV
logical volume name to attach as DB
migrate
Moves BlueFS data from source volume(s) to the target one, source volumes (except the main, i.e. data or block one) are removed on success. LVM volumes are permitted for Target only, both already attached or new one. In the latter case it is attached to the OSD replacing one of the source devices. Following replacement rules apply (in the order of precedence, stop on the first match):
if source list has DB volume - target device replaces it.
if source list has WAL volume - target device replace it.
if source list has slow volume only - operation is not permitted, requires explicit allocation via new-db/new-wal command.
Usage:
ceph-volume lvm migrate --osd-id OSD_ID --osd-fsid OSD_FSID --target TARGET_LV --from {data|db|wal} [{data|db|wal} ...]
Optional arguments:
[-h, –help] show the help message and exit
Required arguments:
- --osd-id OSD_ID
OSD id to perform migration at
- --osd-fsid OSD_FSID
OSD fsid to perform migration at
- --target TARGET_LV
logical volume to move data to
- --from TYPE_LIST
list of source device type names, e.g. –from db wal
simple¶
Scan legacy OSD directories or data devices that may have been created by ceph-disk, or manually.
Subcommands:
activate
Enables a systemd unit that persists the OSD ID and its UUID (also called
fsid
in Ceph CLI tools), so that at boot time it can understand what OSD is
enabled and needs to be mounted, while reading information that was previously
created and persisted at /etc/ceph/osd/
in JSON format.
Usage:
ceph-volume simple activate --bluestore <osd id> <osd fsid>
Optional Arguments:
[-h, –help] show the help message and exit
[–bluestore] bluestore objectstore (default)
[–filestore] filestore objectstore
Note: It requires a matching JSON file with the following format:
/etc/ceph/osd/<osd id>-<osd fsid>.json
scan Scan a running OSD or data device for an OSD for metadata that can later be used to activate and manage the OSD with ceph-volume. The scan method will create a JSON file with the required information plus anything found in the OSD directory as well.
Optionally, the JSON blob can be sent to stdout for further inspection.
Usage on all running OSDs:
ceph-voume simple scan
Usage on data devices:
ceph-volume simple scan <data device>
Running OSD directories:
ceph-volume simple scan <path to osd dir>
Optional arguments:
[-h, –help] show the help message and exit
[–stdout] Send the JSON blob to stdout
[–force] If the JSON file exists at destination, overwrite it
Optional Positional arguments:
<DATA DEVICE or OSD DIR> Actual data partition or a path to the running OSD
trigger
This subcommand is not meant to be used directly, and it is used by systemd so
that it proxies input to ceph-volume simple activate
by parsing the
input from systemd, detecting the UUID and ID associated with an OSD.
Usage:
ceph-volume simple trigger <SYSTEMD-DATA>
The systemd “data” is expected to be in the format of:
<OSD ID>-<OSD UUID>
The JSON file associated with the OSD need to have been persisted previously by a scan (or manually), so that all needed metadata can be used.
Positional arguments:
<SYSTEMD_DATA> Data from a systemd unit containing ID and UUID of the OSD.
Availability¶
ceph-volume is part of Ceph, a massively scalable, open-source, distributed storage system. Please refer to the documentation at http://docs.ceph.com/ for more information.
See also¶
ceph-osd(8),