OSD Config Reference

You can configure Ceph OSD Daemons in the Ceph configuration file (or in recent releases, the central config store), but Ceph OSD Daemons can use the default values and a very minimal configuration. A minimal Ceph OSD Daemon configuration sets osd journal size (for Filestore), host, and uses default values for nearly everything else.

Ceph OSD Daemons are numerically identified in incremental fashion, beginning with 0 using the following convention.

osd.0
osd.1
osd.2

In a configuration file, you may specify settings for all Ceph OSD Daemons in the cluster by adding configuration settings to the [osd] section of your configuration file. To add settings directly to a specific Ceph OSD Daemon (e.g., host), enter it in an OSD-specific section of your configuration file. For example:

[osd]
        osd_journal_size = 5120

[osd.0]
        host = osd-host-a

[osd.1]
        host = osd-host-b

General Settings

The following settings provide a Ceph OSD Daemon’s ID, and determine paths to data and journals. Ceph deployment scripts typically generate the UUID automatically.

Warning

DO NOT change the default paths for data or journals, as it makes it more problematic to troubleshoot Ceph later.

When using Filestore, the journal size should be at least twice the product of the expected drive speed multiplied by filestore_max_sync_interval. However, the most common practice is to partition the journal drive (often an SSD), and mount it such that Ceph uses the entire partition for the journal.

osd_uuid

Description

The universally unique identifier (UUID) for the Ceph OSD Daemon.

Type

UUID

Default

The UUID.

Note

The osd_uuid applies to a single Ceph OSD Daemon. The fsid applies to the entire cluster.

osd_data

Description

The path to the OSDs data. You must create the directory when deploying Ceph. You should mount a drive for OSD data at this mount point. We do not recommend changing the default.

Type

String

Default

/var/lib/ceph/osd/$cluster-$id

osd_max_write_size

Description

The maximum size of a write in megabytes.

Type

32-bit Integer

Default

90

osd_max_object_size

Description

The maximum size of a RADOS object in bytes.

Type

32-bit Unsigned Integer

Default

128MB

osd_client_message_size_cap

Description

The largest client data message allowed in memory.

Type

64-bit Unsigned Integer

Default

500MB default. 500*1024L*1024L

osd_class_dir

Description

The class path for RADOS class plug-ins.

Type

String

Default

$libdir/rados-classes

File System Settings

Ceph builds and mounts file systems which are used for Ceph OSDs.

osd_mkfs_options {fs-type}

Description

Options used when creating a new Ceph Filestore OSD of type {fs-type}.

Type

String

Default for xfs

-f -i 2048

Default for other file systems

{empty string}

For example::

osd_mkfs_options_xfs = -f -d agcount=24

osd_mount_options {fs-type}

Description

Options used when mounting a Ceph Filestore OSD of type {fs-type}.

Type

String

Default for xfs

rw,noatime,inode64

Default for other file systems

rw, noatime

For example::

osd_mount_options_xfs = rw, noatime, inode64, logbufs=8

Journal Settings

This section applies only to the older Filestore OSD back end. Since Luminous BlueStore has been default and preferred.

By default, Ceph expects that you will provision a Ceph OSD Daemon’s journal at the following path, which is usually a symlink to a device or partition:

/var/lib/ceph/osd/$cluster-$id/journal

When using a single device type (for example, spinning drives), the journals should be colocated: the logical volume (or partition) should be in the same device as the data logical volume.

When using a mix of fast (SSDs, NVMe) devices with slower ones (like spinning drives) it makes sense to place the journal on the faster device, while data occupies the slower device fully.

The default osd_journal_size value is 5120 (5 gigabytes), but it can be larger, in which case it will need to be set in the ceph.conf file. A value of 10 gigabytes is common in practice:

osd_journal_size = 10240

osd_journal

Description

The path to the OSD’s journal. This may be a path to a file or a block device (such as a partition of an SSD). If it is a file, you must create the directory to contain it. We recommend using a separate fast device when the osd_data drive is an HDD.

Type

String

Default

/var/lib/ceph/osd/$cluster-$id/journal

osd_journal_size

Description

The size of the journal in megabytes.

Type

32-bit Integer

Default

5120

See Journal Config Reference for additional details.

Monitor OSD Interaction

Ceph OSD Daemons check each other’s heartbeats and report to monitors periodically. Ceph can use default values in many cases. However, if your network has latency issues, you may need to adopt longer intervals. See Configuring Monitor/OSD Interaction for a detailed discussion of heartbeats.

Data Placement

See Pool & PG Config Reference for details.

Scrubbing

In addition to making multiple copies of objects, Ceph ensures data integrity by scrubbing placement groups. Ceph scrubbing is analogous to fsck on the object storage layer. For each placement group, Ceph generates a catalog of all objects and compares each primary object and its replicas to ensure that no objects are missing or mismatched. Light scrubbing (daily) checks the object size and attributes. Deep scrubbing (weekly) reads the data and uses checksums to ensure data integrity.

Scrubbing is important for maintaining data integrity, but it can reduce performance. You can adjust the following settings to increase or decrease scrubbing operations.

osd_max_scrubs

Description

The maximum number of simultaneous scrub operations for a Ceph OSD Daemon.

Type

32-bit Int

Default

1

osd_scrub_begin_hour

Description

This restricts scrubbing to this hour of the day or later. Use osd_scrub_begin_hour = 0 and osd_scrub_end_hour = 0 to allow scrubbing the entire day. Along with osd_scrub_end_hour, they define a time window, in which the scrubs can happen. But a scrub will be performed no matter whether the time window allows or not, as long as the placement group’s scrub interval exceeds osd_scrub_max_interval.

Type

Integer in the range of 0 to 23

Default

0

osd_scrub_end_hour

Description

This restricts scrubbing to the hour earlier than this. Use osd_scrub_begin_hour = 0 and osd_scrub_end_hour = 0 to allow scrubbing for the entire day. Along with osd_scrub_begin_hour, they define a time window, in which the scrubs can happen. But a scrub will be performed no matter whether the time window allows or not, as long as the placement group’s scrub interval exceeds osd_scrub_max_interval.

Type

Integer in the range of 0 to 23

Default

0

osd_scrub_begin_week_day

Description

This restricts scrubbing to this day of the week or later. 0 = Sunday, 1 = Monday, etc. Use osd_scrub_begin_week_day = 0 and osd_scrub_end_week_day = 0 to allow scrubbing for the entire week. Along with osd_scrub_end_week_day, they define a time window in which scrubs can happen. But a scrub will be performed no matter whether the time window allows or not, when the PG’s scrub interval exceeds osd_scrub_max_interval.

Type

Integer in the range of 0 to 6

Default

0

osd_scrub_end_week_day

Description

This restricts scrubbing to days of the week earlier than this. 0 = Sunday, 1 = Monday, etc. Use osd_scrub_begin_week_day = 0 and osd_scrub_end_week_day = 0 to allow scrubbing for the entire week. Along with osd_scrub_begin_week_day, they define a time window, in which the scrubs can happen. But a scrub will be performed no matter whether the time window allows or not, as long as the placement group’s scrub interval exceeds osd_scrub_max_interval.

Type

Integer in the range of 0 to 6

Default

0

osd scrub during recovery

Description

Allow scrub during recovery. Setting this to false will disable scheduling new scrub (and deep–scrub) while there is active recovery. Already running scrubs will be continued. This might be useful to reduce load on busy clusters.

Type

Boolean

Default

false

osd_scrub_thread_timeout

Description

The maximum time in seconds before timing out a scrub thread.

Type

32-bit Integer

Default

60

osd_scrub_finalize_thread_timeout

Description

The maximum time in seconds before timing out a scrub finalize thread.

Type

32-bit Integer

Default

10*60

osd_scrub_load_threshold

Description

The normalized maximum load. Ceph will not scrub when the system load (as defined by getloadavg() / number of online CPUs) is higher than this number. Default is 0.5.

Type

Float

Default

0.5

osd_scrub_min_interval

Description

The minimal interval in seconds for scrubbing the Ceph OSD Daemon when the Ceph Storage Cluster load is low.

Type

Float

Default

Once per day. 24*60*60

osd_scrub_max_interval

Description

The maximum interval in seconds for scrubbing the Ceph OSD Daemon irrespective of cluster load.

Type

Float

Default

Once per week. 7*24*60*60

osd_scrub_chunk_min

Description

The minimal number of object store chunks to scrub during single operation. Ceph blocks writes to single chunk during scrub.

Type

32-bit Integer

Default

5

osd_scrub_chunk_max

Description

The maximum number of object store chunks to scrub during single operation.

Type

32-bit Integer

Default

25

osd_scrub_sleep

Description

Time to sleep before scrubbing the next group of chunks. Increasing this value will slow down the overall rate of scrubbing so that client operations will be less impacted.

Type

Float

Default

0

osd_deep_scrub_interval

Description

The interval for “deep” scrubbing (fully reading all data). The osd_scrub_load_threshold does not affect this setting.

Type

Float

Default

Once per week. 7*24*60*60

osd_scrub_interval_randomize_ratio

Description

Add a random delay to osd_scrub_min_interval when scheduling the next scrub job for a PG. The delay is a random value less than osd_scrub_min_interval * osd_scrub_interval_randomized_ratio. The default setting spreads scrubs throughout the allowed time window of [1, 1.5] * osd_scrub_min_interval.

Type

Float

Default

0.5

osd_deep_scrub_stride

Description

Read size when doing a deep scrub.

Type

32-bit Integer

Default

512 KB. 524288

osd_scrub_auto_repair

Description

Setting this to true will enable automatic PG repair when errors are found by scrubs or deep-scrubs. However, if more than osd_scrub_auto_repair_num_errors errors are found a repair is NOT performed.

Type

Boolean

Default

false

osd_scrub_auto_repair_num_errors

Description

Auto repair will not occur if more than this many errors are found.

Type

32-bit Integer

Default

5

Operations

osd_op_queue

Description

This sets the type of queue to be used for prioritizing ops within each OSD. Both queues feature a strict sub-queue which is dequeued before the normal queue. The normal queue is different between implementations. The WeightedPriorityQueue (wpq) dequeues operations in relation to their priorities to prevent starvation of any queue. WPQ should help in cases where a few OSDs are more overloaded than others. The new mClockQueue (mclock_scheduler) prioritizes operations based on which class they belong to (recovery, scrub, snaptrim, client op, osd subop). See QoS Based on mClock. Requires a restart.

Type

String

Valid Choices

wpq, mclock_scheduler

Default

wpq

osd_op_queue_cut_off

Description

This selects which priority ops will be sent to the strict queue verses the normal queue. The low setting sends all replication ops and higher to the strict queue, while the high option sends only replication acknowledgment ops and higher to the strict queue. Setting this to high should help when a few OSDs in the cluster are very busy especially when combined with wpq in the osd_op_queue setting. OSDs that are very busy handling replication traffic could starve primary client traffic on these OSDs without these settings. Requires a restart.

Type

String

Valid Choices

low, high

Default

high

osd_client_op_priority

Description

The priority set for client operations. This value is relative to that of osd_recovery_op_priority below. The default strongly favors client ops over recovery.

Type

32-bit Integer

Default

63

Valid Range

1-63

osd_recovery_op_priority

Description

The priority of recovery operations vs client operations, if not specified by the pool’s recovery_op_priority. The default value prioritizes client ops (see above) over recovery ops. You may adjust the tradeoff of client impact against the time to restore cluster health by lowering this value for increased prioritization of client ops, or by increasing it to favor recovery.

Type

32-bit Integer

Default

3

Valid Range

1-63

osd_scrub_priority

Description

The default work queue priority for scheduled scrubs when the pool doesn’t specify a value of scrub_priority. This can be boosted to the value of osd_client_op_priority when scrubs are blocking client operations.

Type

32-bit Integer

Default

5

Valid Range

1-63

osd_requested_scrub_priority

Description

The priority set for user requested scrub on the work queue. If this value were to be smaller than osd_client_op_priority it can be boosted to the value of osd_client_op_priority when scrub is blocking client operations.

Type

32-bit Integer

Default

120

osd_snap_trim_priority

Description

The priority set for the snap trim work queue.

Type

32-bit Integer

Default

5

Valid Range

1-63

osd_snap_trim_sleep

Description

Time in seconds to sleep before next snap trim op. Increasing this value will slow down snap trimming. This option overrides backend specific variants.

Type

Float

Default

0

osd_snap_trim_sleep_hdd

Description

Time in seconds to sleep before next snap trim op for HDDs.

Type

Float

Default

5

osd_snap_trim_sleep_ssd

Description

Time in seconds to sleep before next snap trim op for SSD OSDs (including NVMe).

Type

Float

Default

0

osd_snap_trim_sleep_hybrid

Description

Time in seconds to sleep before next snap trim op when OSD data is on an HDD and the OSD journal or WAL+DB is on an SSD.

Type

Float

Default

2

osd_op_thread_timeout

Description

The Ceph OSD Daemon operation thread timeout in seconds.

Type

32-bit Integer

Default

15

osd_op_complaint_time

Description

An operation becomes complaint worthy after the specified number of seconds have elapsed.

Type

Float

Default

30

osd_op_history_size

Description

The maximum number of completed operations to track.

Type

32-bit Unsigned Integer

Default

20

osd_op_history_duration

Description

The oldest completed operation to track.

Type

32-bit Unsigned Integer

Default

600

osd_op_log_threshold

Description

How many operations logs to display at once.

Type

32-bit Integer

Default

5

QoS Based on mClock

Ceph’s use of mClock is now more refined and can be used by following the steps as described in mClock Config Reference.

Core Concepts

Ceph’s QoS support is implemented using a queueing scheduler based on the dmClock algorithm. This algorithm allocates the I/O resources of the Ceph cluster in proportion to weights, and enforces the constraints of minimum reservation and maximum limitation, so that the services can compete for the resources fairly. Currently the mclock_scheduler operation queue divides Ceph services involving I/O resources into following buckets:

  • client op: the iops issued by client

  • osd subop: the iops issued by primary OSD

  • snap trim: the snap trimming related requests

  • pg recovery: the recovery related requests

  • pg scrub: the scrub related requests

And the resources are partitioned using following three sets of tags. In other words, the share of each type of service is controlled by three tags:

  1. reservation: the minimum IOPS allocated for the service.

  2. limitation: the maximum IOPS allocated for the service.

  3. weight: the proportional share of capacity if extra capacity or system oversubscribed.

In Ceph, operations are graded with “cost”. And the resources allocated for serving various services are consumed by these “costs”. So, for example, the more reservation a services has, the more resource it is guaranteed to possess, as long as it requires. Assuming there are 2 services: recovery and client ops:

  • recovery: (r:1, l:5, w:1)

  • client ops: (r:2, l:0, w:9)

The settings above ensure that the recovery won’t get more than 5 requests per second serviced, even if it requires so (see CURRENT IMPLEMENTATION NOTE below), and no other services are competing with it. But if the clients start to issue large amount of I/O requests, neither will they exhaust all the I/O resources. 1 request per second is always allocated for recovery jobs as long as there are any such requests. So the recovery jobs won’t be starved even in a cluster with high load. And in the meantime, the client ops can enjoy a larger portion of the I/O resource, because its weight is “9”, while its competitor “1”. In the case of client ops, it is not clamped by the limit setting, so it can make use of all the resources if there is no recovery ongoing.

CURRENT IMPLEMENTATION NOTE: the current implementation enforces the limit values. Therefore, if a service crosses the enforced limit, the op remains in the operation queue until the limit is restored.

Subtleties of mClock

The reservation and limit values have a unit of requests per second. The weight, however, does not technically have a unit and the weights are relative to one another. So if one class of requests has a weight of 1 and another a weight of 9, then the latter class of requests should get 9 executed at a 9 to 1 ratio as the first class. However that will only happen once the reservations are met and those values include the operations executed under the reservation phase.

Even though the weights do not have units, one must be careful in choosing their values due how the algorithm assigns weight tags to requests. If the weight is W, then for a given class of requests, the next one that comes in will have a weight tag of 1/W plus the previous weight tag or the current time, whichever is larger. That means if W is sufficiently large and therefore 1/W is sufficiently small, the calculated tag may never be assigned as it will get a value of the current time. The ultimate lesson is that values for weight should not be too large. They should be under the number of requests one expects to be serviced each second.

Caveats

There are some factors that can reduce the impact of the mClock op queues within Ceph. First, requests to an OSD are sharded by their placement group identifier. Each shard has its own mClock queue and these queues neither interact nor share information among them. The number of shards can be controlled with the configuration options osd_op_num_shards, osd_op_num_shards_hdd, and osd_op_num_shards_ssd. A lower number of shards will increase the impact of the mClock queues, but may have other deleterious effects.

Second, requests are transferred from the operation queue to the operation sequencer, in which they go through the phases of execution. The operation queue is where mClock resides and mClock determines the next op to transfer to the operation sequencer. The number of operations allowed in the operation sequencer is a complex issue. In general we want to keep enough operations in the sequencer so it’s always getting work done on some operations while it’s waiting for disk and network access to complete on other operations. On the other hand, once an operation is transferred to the operation sequencer, mClock no longer has control over it. Therefore to maximize the impact of mClock, we want to keep as few operations in the operation sequencer as possible. So we have an inherent tension.

The configuration options that influence the number of operations in the operation sequencer are bluestore_throttle_bytes, bluestore_throttle_deferred_bytes, bluestore_throttle_cost_per_io, bluestore_throttle_cost_per_io_hdd, and bluestore_throttle_cost_per_io_ssd.

A third factor that affects the impact of the mClock algorithm is that we’re using a distributed system, where requests are made to multiple OSDs and each OSD has (can have) multiple shards. Yet we’re currently using the mClock algorithm, which is not distributed (note: dmClock is the distributed version of mClock).

Various organizations and individuals are currently experimenting with mClock as it exists in this code base along with their modifications to the code base. We hope you’ll share you’re experiences with your mClock and dmClock experiments on the ceph-devel mailing list.

osd_push_per_object_cost

Description

the overhead for serving a push op

Type

Unsigned Integer

Default

1000

osd_recovery_max_chunk

Description

the maximum total size of data chunks a recovery op can carry.

Type

Unsigned Integer

Default

8 MiB

osd_mclock_scheduler_client_res

Description

IO proportion reserved for each client (default).

Type

Unsigned Integer

Default

1

osd_mclock_scheduler_client_wgt

Description

IO share for each client (default) over reservation.

Type

Unsigned Integer

Default

1

osd_mclock_scheduler_client_lim

Description

IO limit for each client (default) over reservation.

Type

Unsigned Integer

Default

999999

osd_mclock_scheduler_background_recovery_res

Description

IO proportion reserved for background recovery (default).

Type

Unsigned Integer

Default

1

osd_mclock_scheduler_background_recovery_wgt

Description

IO share for each background recovery over reservation.

Type

Unsigned Integer

Default

1

osd_mclock_scheduler_background_recovery_lim

Description

IO limit for background recovery over reservation.

Type

Unsigned Integer

Default

999999

osd_mclock_scheduler_background_best_effort_res

Description

IO proportion reserved for background best_effort (default).

Type

Unsigned Integer

Default

1

osd_mclock_scheduler_background_best_effort_wgt

Description

IO share for each background best_effort over reservation.

Type

Unsigned Integer

Default

1

osd_mclock_scheduler_background_best_effort_lim

Description

IO limit for background best_effort over reservation.

Type

Unsigned Integer

Default

999999

Backfilling

When you add or remove Ceph OSD Daemons to a cluster, CRUSH will rebalance the cluster by moving placement groups to or from Ceph OSDs to restore balanced utilization. The process of migrating placement groups and the objects they contain can reduce the cluster’s operational performance considerably. To maintain operational performance, Ceph performs this migration with ‘backfilling’, which allows Ceph to set backfill operations to a lower priority than requests to read or write data.

osd_max_backfills

Description

The maximum number of backfills allowed to or from a single OSD. Note that this is applied separately for read and write operations.

Type

64-bit Unsigned Integer

Default

1

osd_backfill_scan_min

Description

The minimum number of objects per backfill scan.

Type

32-bit Integer

Default

64

osd_backfill_scan_max

Description

The maximum number of objects per backfill scan.

Type

32-bit Integer

Default

512

osd_backfill_retry_interval

Description

The number of seconds to wait before retrying backfill requests.

Type

Double

Default

10.0

OSD Map

OSD maps reflect the OSD daemons operating in the cluster. Over time, the number of map epochs increases. Ceph provides some settings to ensure that Ceph performs well as the OSD map grows larger.

osd_map_dedup

Description

Enable removing duplicates in the OSD map.

Type

Boolean

Default

true

osd_map_cache_size

Description

The number of OSD maps to keep cached.

Type

32-bit Integer

Default

50

osd_map_message_max

Description

The maximum map entries allowed per MOSDMap message.

Type

32-bit Integer

Default

40

Recovery

When the cluster starts or when a Ceph OSD Daemon crashes and restarts, the OSD begins peering with other Ceph OSD Daemons before writes can occur. See Monitoring OSDs and PGs for details.

If a Ceph OSD Daemon crashes and comes back online, usually it will be out of sync with other Ceph OSD Daemons containing more recent versions of objects in the placement groups. When this happens, the Ceph OSD Daemon goes into recovery mode and seeks to get the latest copy of the data and bring its map back up to date. Depending upon how long the Ceph OSD Daemon was down, the OSD’s objects and placement groups may be significantly out of date. Also, if a failure domain went down (e.g., a rack), more than one Ceph OSD Daemon may come back online at the same time. This can make the recovery process time consuming and resource intensive.

To maintain operational performance, Ceph performs recovery with limitations on the number recovery requests, threads and object chunk sizes which allows Ceph perform well in a degraded state.

osd_recovery_delay_start

Description

After peering completes, Ceph will delay for the specified number of seconds before starting to recover RADOS objects.

Type

Float

Default

0

osd_recovery_max_active

Description

The number of active recovery requests per OSD at one time. More requests will accelerate recovery, but the requests places an increased load on the cluster.

This value is only used if it is non-zero. Normally it is 0, which means that the hdd or ssd values (below) are used, depending on the type of the primary device backing the OSD.

Type

32-bit Integer

Default

0

osd_recovery_max_active_hdd

Description

The number of active recovery requests per OSD at one time, if the primary device is rotational.

Type

32-bit Integer

Default

3

osd_recovery_max_active_ssd

Description

The number of active recovery requests per OSD at one time, if the primary device is non-rotational (i.e., an SSD).

Type

32-bit Integer

Default

10

osd_recovery_max_chunk

Description

The maximum size of a recovered chunk of data to push.

Type

64-bit Unsigned Integer

Default

8 << 20

osd_recovery_max_single_start

Description

The maximum number of recovery operations per OSD that will be newly started when an OSD is recovering.

Type

64-bit Unsigned Integer

Default

1

osd_recovery_thread_timeout

Description

The maximum time in seconds before timing out a recovery thread.

Type

32-bit Integer

Default

30

osd_recover_clone_overlap

Description

Preserves clone overlap during recovery. Should always be set to true.

Type

Boolean

Default

true

osd_recovery_sleep

Description

Time in seconds to sleep before the next recovery or backfill op. Increasing this value will slow down recovery operation while client operations will be less impacted.

Type

Float

Default

0

osd_recovery_sleep_hdd

Description

Time in seconds to sleep before next recovery or backfill op for HDDs.

Type

Float

Default

0.1

osd_recovery_sleep_ssd

Description

Time in seconds to sleep before the next recovery or backfill op for SSDs.

Type

Float

Default

0

osd_recovery_sleep_hybrid

Description

Time in seconds to sleep before the next recovery or backfill op when OSD data is on HDD and OSD journal / WAL+DB is on SSD.

Type

Float

Default

0.025

osd_recovery_priority

Description

The default priority set for recovery work queue. Not related to a pool’s recovery_priority.

Type

32-bit Integer

Default

5

Tiering

osd_agent_max_ops

Description

The maximum number of simultaneous flushing ops per tiering agent in the high speed mode.

Type

32-bit Integer

Default

4

osd_agent_max_low_ops

Description

The maximum number of simultaneous flushing ops per tiering agent in the low speed mode.

Type

32-bit Integer

Default

2

See cache target dirty high ratio for when the tiering agent flushes dirty objects within the high speed mode.

Miscellaneous

osd_snap_trim_thread_timeout

Description

The maximum time in seconds before timing out a snap trim thread.

Type

32-bit Integer

Default

1*60*60

osd_backlog_thread_timeout

Description

The maximum time in seconds before timing out a backlog thread.

Type

32-bit Integer

Default

1*60*60

osd_default_notify_timeout

Description

The OSD default notification timeout (in seconds).

Type

32-bit Unsigned Integer

Default

30

osd_check_for_log_corruption

Description

Check log files for corruption. Can be computationally expensive.

Type

Boolean

Default

false

osd_remove_thread_timeout

Description

The maximum time in seconds before timing out a remove OSD thread.

Type

32-bit Integer

Default

60*60

osd_command_thread_timeout

Description

The maximum time in seconds before timing out a command thread.

Type

32-bit Integer

Default

10*60

osd_delete_sleep

Description

Time in seconds to sleep before the next removal transaction. This throttles the PG deletion process.

Type

Float

Default

0

osd_delete_sleep_hdd

Description

Time in seconds to sleep before the next removal transaction for HDDs.

Type

Float

Default

5

osd_delete_sleep_ssd

Description

Time in seconds to sleep before the next removal transaction for SSDs.

Type

Float

Default

0

osd_delete_sleep_hybrid

Description

Time in seconds to sleep before the next removal transaction when OSD data is on HDD and OSD journal or WAL+DB is on SSD.

Type

Float

Default

1

osd_command_max_records

Description

Limits the number of lost objects to return.

Type

32-bit Integer

Default

256

osd_fast_fail_on_connection_refused

Description

If this option is enabled, crashed OSDs are marked down immediately by connected peers and MONs (assuming that the crashed OSD host survives). Disable it to restore old behavior, at the expense of possible long I/O stalls when OSDs crash in the middle of I/O operations.

Type

Boolean

Default

true