Notice

This document is for a development version of Ceph.

zap

This subcommand is used to zap lvs, partitions or raw devices that have been used by ceph OSDs so that they may be reused. If given a path to a logical volume it must be in the format of vg/lv. Any file systems present on the given lv or partition will be removed and all data will be purged.

Note

The lv or partition will be kept intact.

Note

If the logical volume, raw device or partition is being used for any ceph related mount points they will be unmounted.

Zapping a logical volume:

ceph-volume lvm zap {vg name/lv name}

Zapping a partition:

ceph-volume lvm zap /dev/sdc1

Removing Devices

When zapping, and looking for full removal of the device (lv, vg, or partition) use the --destroy flag. A common use case is to simply deploy OSDs using a whole raw device. If you do so and then wish to reuse that device for another OSD you must use the --destroy flag when zapping so that the vgs and lvs that ceph-volume created on the raw device will be removed.

Note

Multiple devices can be accepted at once, to zap them all

Zapping a raw device and destroying any vgs or lvs present:

ceph-volume lvm zap /dev/sdc --destroy

This action can be performed on partitions, and logical volumes as well:

ceph-volume lvm zap /dev/sdc1 --destroy
ceph-volume lvm zap osd-vg/data-lv --destroy

Finally, multiple devices can be detected if filtering by OSD ID and/or OSD FSID. Either identifier can be used or both can be used at the same time. This is useful in situations where multiple devices associated with a specific ID need to be purged. When using the FSID, the filtering is stricter, and might not match other (possibly invalid) devices associated to an ID.

By ID only:

ceph-volume lvm zap --destroy --osd-id 1

By FSID:

ceph-volume lvm zap --destroy --osd-fsid 2E8FBE58-0328-4E3B-BFB7-3CACE4E9A6CE

By both:

ceph-volume lvm zap --destroy --osd-fsid 2E8FBE58-0328-4E3B-BFB7-3CACE4E9A6CE --osd-id 1

Warning

If the systemd unit associated with the OSD ID to be zapped is detected as running, the tool will refuse to zap until the daemon is stopped.