Notice

This document is for a development version of Ceph.

Snapshots

A snapshot is a read-only logical copy of an image at a particular point in time: a checkpoint. One of the advanced features of Ceph block devices is that you can create snapshots of images to retain point-in-time state history. Ceph also supports snapshot layering, which allows you to clone images (for example, VM images) quickly and easily. Ceph block device snapshots are managed using the rbd command and several higher-level interfaces, including QEMU, libvirt, OpenStack, OpenNebula and CloudStack.

Important

To use RBD snapshots, you must have a running Ceph cluster.

Note

Because RBD is unaware of any file system within an image (volume), snapshots are merely crash-consistent unless they are coordinated within the mounting (attaching) operating system. We therefore recommend that you pause or stop I/O before taking a snapshot.

If the volume contains a file system, the file system should be in an internally consistent state before a snapshot is taken. Snapshots taken without write quiescing could need an fsck pass before they are mounted again. To quiesce I/O you can use fsfreeze command. See the fsfreeze(8) man page for more details.

For virtual machines, qemu-guest-agent can be used to automatically freeze file systems when creating a snapshot.

Cephx Notes

When cephx authentication is enabled (it is by default), you must specify a user name or ID and a path to the keyring containing the corresponding key. See User Management for details.

rbd --id {user-ID} --keyring /path/to/secret [commands]
rbd --name {username} --keyring /path/to/secret [commands]

For example:

rbd --id admin --keyring /etc/ceph/ceph.keyring [commands]
rbd --name client.admin --keyring /etc/ceph/ceph.keyring [commands]

Tip

Add the user and secret to the CEPH_ARGS environment variable to avoid re-entry of these parameters.

Snapshot Basics

The following procedures demonstrate how to create, list, and remove snapshots using the rbd command.

Create Snapshot

To create a snapshot, use the rbd snap create command and specify the pool name, the image name, and the snap name:

rbd snap create {pool-name}/{image-name}@{snap-name}

For example:

rbd snap create rbd/foo@snapname

List Snapshots

To list the snapshots of an image, use the rbd snap ls command and specify the pool name and the image name:

rbd snap ls {pool-name}/{image-name}

For example:

rbd snap ls rbd/foo

Roll back Snapshot

To roll back to a snapshot, use the rbd snap rollback command and specify the pool name, the image name, and the snap name:

rbd snap rollback {pool-name}/{image-name}@{snap-name}

For example:

rbd snap rollback rbd/foo@snapname

Note

Rolling back an image to a snapshot means overwriting the current version of the image with data from a snapshot. The time it takes to execute a rollback increases with the size of the image. It is faster to clone from a snapshot than to roll back an image to a snapshot. Cloning from a snapshot is the preferred method of returning to a pre-existing state.

Delete a Snapshot

To delete a snapshot, use the rbd snap rm command and specify the pool name, the image name, and the snap name:

rbd snap rm {pool-name}/{image-name}@{snap-name}

For example:

rbd snap rm rbd/foo@snapname

Note

Ceph OSDs delete data asynchronously, so deleting a snapshot does not immediately free up the capacity of the underlying OSDs. This process is known as “snaptrim”, and is referred to as such in ceph status output.

Purge Snapshots

To delete all snapshots, use the rbd snap purge command and specify the pool name and the image name:

rbd snap purge {pool-name}/{image-name}

For example:

rbd snap purge rbd/foo

Layering

Ceph supports the ability to create many copy-on-write (COW) clones of a block device snapshot. Snapshot layering enables Ceph block device clients to create images very quickly. For example, you might create a block device image with a Linux VM written to it, snapshot the image, protect the snapshot, and create as many copy-on-write clones as you like. A snapshot is read-only, so cloning a snapshot simplifies semantics, making it possible to create clones rapidly.

Note

The terms “parent” and “child” refer to a Ceph block device snapshot (parent) and the corresponding image cloned from the snapshot (child). These terms are important for the command line usage below.

Each cloned image (child) stores a reference to its parent image, which enables the cloned image to open the parent snapshot and read it.

A copy-on-write clone of a snapshot behaves exactly like any other Ceph block device image. You can read to, write from, clone, and resize cloned images. There are no special restrictions with cloned images. However, the copy-on-write clone of a snapshot depends on the snapshot, so you must protect the snapshot before you clone it. The diagram below depicts this process.

Note

Ceph supports the cloning of only “RBD format 2” images (that is, images created without specifying --image-format 1). The Linux kernel client supports cloned images beginning with the 3.10 release.

Getting Started with Layering

Ceph block device layering is a simple process. You must have an image. You must create a snapshot of the image. You must protect the snapshot. After you have performed these steps, you can begin cloning the snapshot.

The cloned image has a reference to the parent snapshot, and includes the pool ID, the image ID, and the snapshot ID. The inclusion of the pool ID means that you may clone snapshots from one pool to images in another pool.

  1. Image Template: A common use case for block device layering is to create a base image and a snapshot that serves as a template for clones. For example: a user may create an image for a Linux distribution (for example, Ubuntu 22.04) and create a snapshot of it. The user may occasionally update the image and create a new snapshot (by using such commands as sudo apt-get update, sudo apt-get upgrade, or sudo apt-get dist-upgrade followed by rbd snap create). As the image matures, the user can clone any one of the snapshots.

  2. Extended Template: A more advanced use case includes extending a template image to provide more information than a base image. For example, a user may clone an image (for example, a VM template) and install other software (for example, a database, a content management system, an analytics system) and then snapshot the extended image, which may itself be updated just like the base image.

  3. Template Pool: One way to use block device layering is to create a pool that contains (1) base images that act as templates and (2) snapshots of those templates. You may then extend read-only privileges to users so that they may clone the snapshots even though they do not have permissions that allow them to write or execute within the pool.

  4. Image Migration/Recovery: One way to use block device layering is to migrate or recover data from one pool into another pool.

Protecting a Snapshot

Clones access the parent snapshots. All clones would break if a user inadvertently deleted the parent snapshot. To prevent data loss, you must protect the snapshot before you can clone it:

rbd snap protect {pool-name}/{image-name}@{snapshot-name}

For example:

rbd snap protect rbd/foo@snapname

Note

You cannot delete a protected snapshot.

Cloning a Snapshot

To clone a snapshot, specify the parent pool, the parent image, and the parent snapshot; and also the child pool together with the image name. You must protect the snapshot before you can clone it:

rbd clone {pool-name}/{parent-image-name}@{snap-name} {pool-name}/{child-image-name}

For example:

rbd clone rbd/foo@snapname rbd/bar

Note

You may clone a snapshot from one pool to an image in another pool. For example, you may maintain read-only images and snapshots as templates in one pool, and writeable clones in another pool.

Unprotecting a Snapshot

Before you can delete a snapshot, you must first unprotect it. Additionally, you may NOT delete snapshots that have references from clones. You must flatten or delete each clone of a snapshot before you can unprotect the snapshot:

rbd snap unprotect {pool-name}/{image-name}@{snapshot-name}

For example:

rbd snap unprotect rbd/foo@snapname

Listing Children of a Snapshot

To list the children of a snapshot, use the rbd children command and specify the pool name, the image name, and the snap name:

rbd children {pool-name}/{image-name}@{snapshot-name}

For example:

rbd children rbd/foo@snapname

Flattening a Cloned Image

Cloned images retain a reference to the parent snapshot. When you remove the reference to the parent snapshot from the clone, you effectively “flatten” the clone by copying the data stored in the snapshot to the clone. The time it takes to flatten a clone increases with the size of the snapshot. To delete a snapshot, you must first flatten the child images (or delete them):

rbd flatten {pool-name}/{image-name}

For example:

rbd flatten rbd/bar

Note

Since a flattened image contains all the data stored in the snapshot, a flattened image takes up more storage space than a layered clone does.

Brought to you by the Ceph Foundation

The Ceph Documentation is a community resource funded and hosted by the non-profit Ceph Foundation. If you would like to support this and our other efforts, please consider joining now.