Manually editing a CRUSH Map

Note

Manually editing the CRUSH map is an advanced administrator operation. All CRUSH changes that are necessary for the overwhelming majority of installations are possible via the standard ceph CLI and do not require manual CRUSH map edits. If you have identified a use case where manual edits are necessary with recent Ceph releases, consider contacting the Ceph developers so that future versions of Ceph can obviate your corner case.

To edit an existing CRUSH map:

  1. Get the CRUSH map.

  2. Decompile the CRUSH map.

  3. Edit at least one of Devices, Buckets and Rules.

  4. Recompile the CRUSH map.

  5. Set the CRUSH map.

For details on setting the CRUSH map rule for a specific pool, see Set Pool Values.

Get a CRUSH Map

To get the CRUSH map for your cluster, execute the following:

ceph osd getcrushmap -o {compiled-crushmap-filename}

Ceph will output (-o) a compiled CRUSH map to the filename you specified. Since the CRUSH map is in a compiled form, you must decompile it first before you can edit it.

Decompile a CRUSH Map

To decompile a CRUSH map, execute the following:

crushtool -d {compiled-crushmap-filename} -o {decompiled-crushmap-filename}

Recompile a CRUSH Map

To compile a CRUSH map, execute the following:

crushtool -c {decompiled-crushmap-filename} -o {compiled-crushmap-filename}

Set the CRUSH Map

To set the CRUSH map for your cluster, execute the following:

ceph osd setcrushmap -i {compiled-crushmap-filename}

Ceph will load (-i) a compiled CRUSH map from the filename you specified.

Sections

There are six main sections to a CRUSH Map.

  1. tunables: The preamble at the top of the map describes any tunables that differ from the historical / legacy CRUSH behavior. These correct for old bugs, optimizations, or other changes that have been made over the years to improve CRUSH’s behavior.

  2. devices: Devices are individual OSDs that store data.

  3. types: Bucket types define the types of buckets used in your CRUSH hierarchy. Buckets consist of a hierarchical aggregation of storage locations (e.g., rows, racks, chassis, hosts, etc.) and their assigned weights.

  4. buckets: Once you define bucket types, you must define each node in the hierarchy, its type, and which devices or other nodes it contains.

  5. rules: Rules define policy about how data is distributed across devices in the hierarchy.

  6. choose_args: Choose_args are alternative weights associated with the hierarchy that have been adjusted to optimize data placement. A single choose_args map can be used for the entire cluster, or one can be created for each individual pool.

CRUSH Map Devices

Devices are individual OSDs that store data. Usually one is defined here for each OSD daemon in your cluster. Devices are identified by an id (a non-negative integer) and a name, normally osd.N where N is the device id.

Devices may also have a device class associated with them (e.g., hdd or ssd), allowing them to be conveniently targeted by a crush rule.

devices
device {num} {osd.name} [class {class}]

For example:

devices
device 0 osd.0 class ssd
device 1 osd.1 class hdd
device 2 osd.2
device 3 osd.3

In most cases, each device maps to a single ceph-osd daemon. This is normally a single storage device, a pair of devices (for example, one for data and one for a journal or metadata), or in some cases a small RAID device.

CRUSH Map Bucket Types

The second list in the CRUSH map defines ‘bucket’ types. Buckets facilitate a hierarchy of nodes and leaves. Node (or non-leaf) buckets typically represent physical locations in a hierarchy. Nodes aggregate other nodes or leaves. Leaf buckets represent ceph-osd daemons and their corresponding storage media.

Tip

The term “bucket” used in the context of CRUSH means a node in the hierarchy, i.e. a location or a piece of physical hardware. It is a different concept from the term “bucket” when used in the context of RADOS Gateway APIs.

To add a bucket type to the CRUSH map, create a new line under your list of bucket types. Enter type followed by a unique numeric ID and a bucket name. By convention, there is one leaf bucket and it is type 0; however, you may give it any name you like (e.g., osd, disk, drive, storage):

# types
type {num} {bucket-name}

For example:

# types
type 0 osd
type 1 host
type 2 chassis
type 3 rack
type 4 row
type 5 pdu
type 6 pod
type 7 room
type 8 datacenter
type 9 zone
type 10 region
type 11 root

CRUSH Map Bucket Hierarchy

The CRUSH algorithm distributes data objects among storage devices according to a per-device weight value, approximating a uniform probability distribution. CRUSH distributes objects and their replicas according to the hierarchical cluster map you define. Your CRUSH map represents the available storage devices and the logical elements that contain them.

To map placement groups to OSDs across failure domains, a CRUSH map defines a hierarchical list of bucket types (i.e., under #types in the generated CRUSH map). The purpose of creating a bucket hierarchy is to segregate the leaf nodes by their failure domains, such as hosts, chassis, racks, power distribution units, pods, rows, rooms, and data centers. With the exception of the leaf nodes representing OSDs, the rest of the hierarchy is arbitrary, and you may define it according to your own needs.

We recommend adapting your CRUSH map to your firm’s hardware naming conventions and using instance names that reflect the physical hardware. Your naming practice can make it easier to administer the cluster and troubleshoot problems when an OSD and/or other hardware malfunctions and the administrator need access to physical hardware.

In the following example, the bucket hierarchy has a leaf bucket named osd, and two node buckets named host and rack respectively.

Note

The higher numbered rack bucket type aggregates the lower numbered host bucket type.

Since leaf nodes reflect storage devices declared under the #devices list at the beginning of the CRUSH map, you do not need to declare them as bucket instances. The second lowest bucket type in your hierarchy usually aggregates the devices (i.e., it’s usually the computer containing the storage media, and uses whatever term you prefer to describe it, such as “node”, “computer”, “server,” “host”, “machine”, etc.). In high density environments, it is increasingly common to see multiple hosts/nodes per chassis. You should account for chassis failure too–e.g., the need to pull a chassis if a node fails may result in bringing down numerous hosts/nodes and their OSDs.

When declaring a bucket instance, you must specify its type, give it a unique name (string), assign it a unique ID expressed as a negative integer (optional), specify a weight relative to the total capacity/capability of its item(s), specify the bucket algorithm (usually straw2), and the hash (usually 0, reflecting hash algorithm rjenkins1). A bucket may have one or more items. The items may consist of node buckets or leaves. Items may have a weight that reflects the relative weight of the item.

You may declare a node bucket with the following syntax:

[bucket-type] [bucket-name] {
        id [a unique negative numeric ID]
        weight [the relative capacity/capability of the item(s)]
        alg [the bucket type: uniform | list | tree | straw | straw2 ]
        hash [the hash type: 0 by default]
        item [item-name] weight [weight]
}

For example, using the diagram above, we would define two host buckets and one rack bucket. The OSDs are declared as items within the host buckets:

host node1 {
        id -1
        alg straw2
        hash 0
        item osd.0 weight 1.00
        item osd.1 weight 1.00
}

host node2 {
        id -2
        alg straw2
        hash 0
        item osd.2 weight 1.00
        item osd.3 weight 1.00
}

rack rack1 {
        id -3
        alg straw2
        hash 0
        item node1 weight 2.00
        item node2 weight 2.00
}

Note

In the foregoing example, note that the rack bucket does not contain any OSDs. Rather it contains lower level host buckets, and includes the sum total of their weight in the item entry.

Bucket Types

Ceph supports five bucket types, each representing a tradeoff between performance and reorganization efficiency. If you are unsure of which bucket type to use, we recommend using a straw2 bucket. For a detailed discussion of bucket types, refer to CRUSH - Controlled, Scalable, Decentralized Placement of Replicated Data, and more specifically to Section 3.4. The bucket types are:

  1. uniform: Uniform buckets aggregate devices with exactly the same weight. For example, when firms commission or decommission hardware, they typically do so with many machines that have exactly the same physical configuration (e.g., bulk purchases). When storage devices have exactly the same weight, you may use the uniform bucket type, which allows CRUSH to map replicas into uniform buckets in constant time. With non-uniform weights, you should use another bucket algorithm.

  2. list: List buckets aggregate their content as linked lists. Based on the RUSH P algorithm, a list is a natural and intuitive choice for an expanding cluster: either an object is relocated to the newest device with some appropriate probability, or it remains on the older devices as before. The result is optimal data migration when items are added to the bucket. Items removed from the middle or tail of the list, however, can result in a significant amount of unnecessary movement, making list buckets most suitable for circumstances in which they never (or very rarely) shrink.

  3. tree: Tree buckets use a binary search tree. They are more efficient than list buckets when a bucket contains a larger set of items. Based on the RUSH R algorithm, tree buckets reduce the placement time to O(log n), making them suitable for managing much larger sets of devices or nested buckets.

  4. straw: List and Tree buckets use a divide and conquer strategy in a way that either gives certain items precedence (e.g., those at the beginning of a list) or obviates the need to consider entire subtrees of items at all. That improves the performance of the replica placement process, but can also introduce suboptimal reorganization behavior when the contents of a bucket change due an addition, removal, or re-weighting of an item. The straw bucket type allows all items to fairly “compete” against each other for replica placement through a process analogous to a draw of straws.

  5. straw2: Straw2 buckets improve Straw to correctly avoid any data movement between items when neighbor weights change.

    For example the weight of item A including adding it anew or removing it completely, there will be data movement only to or from item A.

Hash

Each bucket uses a hash algorithm. Currently, Ceph supports rjenkins1. Enter 0 as your hash setting to select rjenkins1.

Weighting Bucket Items

Ceph expresses bucket weights as doubles, which allows for fine weighting. A weight is the relative difference between device capacities. We recommend using 1.00 as the relative weight for a 1TB storage device. In such a scenario, a weight of 0.5 would represent approximately 500GB, and a weight of 3.00 would represent approximately 3TB. Higher level buckets have a weight that is the sum total of the leaf items aggregated by the bucket.

A bucket item weight is one dimensional, but you may also calculate your item weights to reflect the performance of the storage drive. For example, if you have many 1TB drives where some have relatively low data transfer rate and the others have a relatively high data transfer rate, you may weight them differently, even though they have the same capacity (e.g., a weight of 0.80 for the first set of drives with lower total throughput, and 1.20 for the second set of drives with higher total throughput).

CRUSH Map Rules

CRUSH maps support the notion of ‘CRUSH rules’, which are the rules that determine data placement for a pool. The default CRUSH map has a rule for each pool. For large clusters, you will likely create many pools where each pool may have its own non-default CRUSH rule.

Note

In most cases, you will not need to modify the default rule. When you create a new pool, by default the rule will be set to 0.

CRUSH rules define placement and replication strategies or distribution policies that allow you to specify exactly how CRUSH places object replicas. For example, you might create a rule selecting a pair of targets for 2-way mirroring, another rule for selecting three targets in two different data centers for 3-way mirroring, and yet another rule for erasure coding over six storage devices. For a detailed discussion of CRUSH rules, refer to CRUSH - Controlled, Scalable, Decentralized Placement of Replicated Data, and more specifically to Section 3.2.

A rule takes the following form:

rule <rulename> {

        id [a unique whole numeric ID]
        type [ replicated | erasure ]
        min_size <min-size>
        max_size <max-size>
        step take <bucket-name> [class <device-class>]
        step [choose|chooseleaf] [firstn|indep] <N> type <bucket-type>
        step emit
}

id

Description

A unique whole number for identifying the rule.

Purpose

A component of the rule mask.

Type

Integer

Required

Yes

Default

0

type

Description

Describes a rule for either a storage drive (replicated) or a RAID.

Purpose

A component of the rule mask.

Type

String

Required

Yes

Default

replicated

Valid Values

Currently only replicated and erasure

min_size

Description

If a pool makes fewer replicas than this number, CRUSH will NOT select this rule.

Type

Integer

Purpose

A component of the rule mask.

Required

Yes

Default

1

max_size

Description

If a pool makes more replicas than this number, CRUSH will NOT select this rule.

Type

Integer

Purpose

A component of the rule mask.

Required

Yes

Default

10

step take <bucket-name> [class <device-class>]

Description

Takes a bucket name, and begins iterating down the tree. If the device-class is specified, it must match a class previously used when defining a device. All devices that do not belong to the class are excluded.

Purpose

A component of the rule.

Required

Yes

Example

step take data

step choose firstn {num} type {bucket-type}

Description

Selects the number of buckets of the given type from within the current bucket. The number is usually the number of replicas in the pool (i.e., pool size).

  • If {num} == 0, choose pool-num-replicas buckets (all available).

  • If {num} > 0 && < pool-num-replicas, choose that many buckets.

  • If {num} < 0, it means pool-num-replicas - {num}.

Purpose

A component of the rule.

Prerequisite

Follows step take or step choose.

Example

step choose firstn 1 type row

step chooseleaf firstn {num} type {bucket-type}

Description

Selects a set of buckets of {bucket-type} and chooses a leaf node (that is, an OSD) from the subtree of each bucket in the set of buckets. The number of buckets in the set is usually the number of replicas in the pool (i.e., pool size).

  • If {num} == 0, choose pool-num-replicas buckets (all available).

  • If {num} > 0 && < pool-num-replicas, choose that many buckets.

  • If {num} < 0, it means pool-num-replicas - {num}.

Purpose

A component of the rule. Usage removes the need to select a device using two steps.

Prerequisite

Follows step take or step choose.

Example

step chooseleaf firstn 0 type row

step emit

Description

Outputs the current value and empties the stack. Typically used at the end of a rule, but may also be used to pick from different trees in the same rule.

Purpose

A component of the rule.

Prerequisite

Follows step choose.

Example

step emit

Important

A given CRUSH rule may be assigned to multiple pools, but it is not possible for a single pool to have multiple CRUSH rules.

firstn versus indep

Description

Controls the replacement strategy CRUSH uses when items (OSDs) are marked down in the CRUSH map. If this rule is to be used with replicated pools it should be firstn and if it’s for erasure-coded pools it should be indep.

The reason has to do with how they behave when a previously-selected device fails. Let’s say you have a PG stored on OSDs 1, 2, 3, 4, 5. Then 3 goes down.

With the “firstn” mode, CRUSH simply adjusts its calculation to select 1 and 2, then selects 3 but discovers it’s down, so it retries and selects 4 and 5, and then goes on to select a new OSD 6. So the final CRUSH mapping change is 1, 2, 3, 4, 5 -> 1, 2, 4, 5, 6.

But if you’re storing an EC pool, that means you just changed the data mapped to OSDs 4, 5, and 6! So the “indep” mode attempts to not do that. You can instead expect it, when it selects the failed OSD 3, to try again and pick out 6, for a final transformation of: 1, 2, 3, 4, 5 -> 1, 2, 6, 4, 5

Migrating from a legacy SSD rule to device classes

It used to be necessary to manually edit your CRUSH map and maintain a parallel hierarchy for each specialized device type (e.g., SSD) in order to write rules that apply to those devices. Since the Luminous release, the device class feature has enabled this transparently.

However, migrating from an existing, manually customized per-device map to the new device class rules in the trivial way will cause all data in the system to be reshuffled.

The crushtool has a few commands that can transform a legacy rule and hierarchy so that you can start using the new class-based rules. There are three types of transformations possible:

  1. --reclassify-root <root-name> <device-class>

    This will take everything in the hierarchy beneath root-name and adjust any rules that reference that root via a take <root-name> to instead take <root-name> class <device-class>. It renumbers the buckets in such a way that the old IDs are instead used for the specified class’s “shadow tree” so that no data movement takes place.

    For example, imagine you have an existing rule like:

    rule replicated_ruleset {
       id 0
       type replicated
       min_size 1
       max_size 10
       step take default
       step chooseleaf firstn 0 type rack
       step emit
    }
    

    If you reclassify the root default as class hdd, the rule will become:

    rule replicated_ruleset {
       id 0
       type replicated
       min_size 1
       max_size 10
       step take default class hdd
       step chooseleaf firstn 0 type rack
       step emit
    }
    
  2. --set-subtree-class <bucket-name> <device-class>

    This will mark every device in the subtree rooted at bucket-name with the specified device class.

    This is normally used in conjunction with the --reclassify-root option to ensure that all devices in that root are labeled with the correct class. In some situations, however, some of those devices (correctly) have a different class and we do not want to relabel them. In such cases, one can exclude the --set-subtree-class option. This means that the remapping process will not be perfect, since the previous rule distributed across devices of multiple classes but the adjusted rules will only map to devices of the specified device-class, but that often is an accepted level of data movement when the number of outlier devices is small.

  3. --reclassify-bucket <match-pattern> <device-class> <default-parent>

    This will allow you to merge a parallel type-specific hierarchy with the normal hierarchy. For example, many users have maps like:

    host node1 {
       id -2           # do not change unnecessarily
       # weight 109.152
       alg straw2
       hash 0  # rjenkins1
       item osd.0 weight 9.096
       item osd.1 weight 9.096
       item osd.2 weight 9.096
       item osd.3 weight 9.096
       item osd.4 weight 9.096
       item osd.5 weight 9.096
       ...
    }
    
    host node1-ssd {
       id -10          # do not change unnecessarily
       # weight 2.000
       alg straw2
       hash 0  # rjenkins1
       item osd.80 weight 2.000
       ...
    }
    
    root default {
       id -1           # do not change unnecessarily
       alg straw2
       hash 0  # rjenkins1
       item node1 weight 110.967
       ...
    }
    
    root ssd {
       id -18          # do not change unnecessarily
       # weight 16.000
       alg straw2
       hash 0  # rjenkins1
       item node1-ssd weight 2.000
       ...
    }
    

    This function will reclassify each bucket that matches a pattern. The pattern can look like %suffix or prefix%. For example, in the above example, we would use the pattern %-ssd. For each matched bucket, the remaining portion of the name (that matches the % wildcard) specifies the base bucket. All devices in the matched bucket are labeled with the specified device class and then moved to the base bucket. If the base bucket does not exist (e.g., node12-ssd exists but node12 does not), then it is created and linked underneath the specified default parent bucket. In each case, we are careful to preserve the old bucket IDs for the new shadow buckets to prevent data movement. Any rules with take steps referencing the old buckets are adjusted.

  4. --reclassify-bucket <bucket-name> <device-class> <base-bucket>

    The same command can also be used without a wildcard to map a single bucket. For example, in the previous example, we want the ssd bucket to be mapped to the default bucket.

The final command to convert the map comprising the above fragments would be something like:

ceph osd getcrushmap -o original
crushtool -i original --reclassify \
  --set-subtree-class default hdd \
  --reclassify-root default hdd \
  --reclassify-bucket %-ssd ssd default \
  --reclassify-bucket ssd ssd default \
  -o adjusted

In order to ensure that the conversion is correct, there is a --compare command that will test a large sample of inputs against the CRUSH map and check that the same result is output. These inputs are controlled by the same options that apply to the --test command. For the above example,:

crushtool -i original --compare adjusted
rule 0 had 0/10240 mismatched mappings (0)
rule 1 had 0/10240 mismatched mappings (0)
maps appear equivalent

If there were differences, the ratio of remapped inputs would be reported in the parentheses.

When you are satisfied with the adjusted map, apply it to the cluster with a command of the form:

ceph osd setcrushmap -i adjusted

Tuning CRUSH, the hard way

If you can ensure that all clients are running recent code, you can adjust the tunables by extracting the CRUSH map, modifying the values, and reinjecting it into the cluster.

  • Extract the latest CRUSH map:

    ceph osd getcrushmap -o /tmp/crush
    
  • Adjust tunables. These values appear to offer the best behavior for both large and small clusters we tested with. You will need to additionally specify the --enable-unsafe-tunables argument to crushtool for this to work. Please use this option with extreme care.:

    crushtool -i /tmp/crush --set-choose-local-tries 0 --set-choose-local-fallback-tries 0 --set-choose-total-tries 50 -o /tmp/crush.new
    
  • Reinject modified map:

    ceph osd setcrushmap -i /tmp/crush.new
    

Legacy values

For reference, the legacy values for the CRUSH tunables can be set with:

crushtool -i /tmp/crush --set-choose-local-tries 2 --set-choose-local-fallback-tries 5 --set-choose-total-tries 19 --set-chooseleaf-descend-once 0 --set-chooseleaf-vary-r 0 -o /tmp/crush.legacy

Again, the special --enable-unsafe-tunables option is required. Further, as noted above, be careful running old versions of the ceph-osd daemon after reverting to legacy values as the feature bit is not perfectly enforced.